How NOT to lube a mechbox

ThunderCactus · August 31st, 2009, 23:08

yep.....that's OIL in there....
and it's ALL over everything, the inside of the receiver, the stock tube which was housing a fucking directly connected LiPo battery with no fuse or PCB, all over the motor, the piston, and inside the barrel.
One of the motor leads had broken in half and was soldered back together, there was also a break in the insulation of the wiring where it got crushed somewhere.

This gun is an ordeal, I have to take it to work and clean it all with degreaser, buy all new plastic parts, redo all the wiring, possibly a new motor, clean out the barrel and hopup chamber, and of course get rid of that LiPo since theres no protection of ANY kind on it.

Now this isn't the owner's fault, this is a hideous product of someone who didn't have the slightest clue as to what they were doing when they were upgrading this gun.

There's a reason systema packages and sells gear GREASE and not gear OIL.

lemegacool · August 31st, 2009, 23:10

LOL hehehe noob guntech! lol

CDN_Stalker · August 31st, 2009, 23:18

Welcome to MY world, and also an indication one reason I got out of gun work overall.

Thenooblord · August 31st, 2009, 23:18

It wasnt me! xD

lemegacool · August 31st, 2009, 23:22

i got a friends new "used" m14 ebr in here for repair/tuneup and WOW... it was missing at least 7 scews on the body... missing the gearbox's fron screw, gun was making the sound of a grinder... and was sold in "mint" condition... lol

also got a tm hicapa 4.3 to repair... how the fuck can you manage to strip the 2 grip srews?!?!?

Quote:

Originally Posted by Thenooblord

It wasnt me! xD

LOL

AngelusNex · August 31st, 2009, 23:27

>.<' jesus... people thinking airsoft guns are car engines......

aznpos531 · August 31st, 2009, 23:32

I hope it wasn't canola oil

ThunderCactus · August 31st, 2009, 23:39

There were breaks in the wiring insulation, conductive oil everywhere, running an unprotect lipo in the stock tube.
This gun WAS a functional frag grenade.
I can't believe I actually test fired this thing before I opened it

Shirley · September 1st, 2009, 00:07

You call that upgrading? That's obviously downgrading. LOL

Amos · September 1st, 2009, 00:41

JESUS.

Specially with a LI-PO setup... You should contact that gun-doc... or find out who it is and contact every single person who's gun that person has worked on...

... lol Time to make "Manitoba Airsoft Association GUNTECH" rules?

Janus · September 1st, 2009, 00:47

whirr pew pew pew pew CHUGGA CHUGGA GRIIIIIIND WANK

"The hell? Airsoft guns aren't supposed to go 'chugga chugga grind wank.' "

ThunderCactus · September 1st, 2009, 19:20

Amos and I have seen an AUG with a tight shimming job that slowed down and sped up as it fired. The original owner claimed that shims "wear in" after time....
Yep....those brass shims pushing against those rotating bearings will wear in REAL quick lol

Tankdude · September 1st, 2009, 19:44

every see a shim mushed into the piston?

Daiviet · September 1st, 2009, 19:46

how in gods name?...

ThunderCactus · September 1st, 2009, 21:05

'haven't seen one get smashed into a piston but I've seen one get cut in half! lol

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 31st, 2009, 23:08	#1
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	How NOT to lube a mechbox yep.....that's OIL in there.... and it's ALL over everything, the inside of the receiver, the stock tube which was housing a fucking directly connected LiPo battery with no fuse or PCB, all over the motor, the piston, and inside the barrel. One of the motor leads had broken in half and was soldered back together, there was also a break in the insulation of the wiring where it got crushed somewhere. This gun is an ordeal, I have to take it to work and clean it all with degreaser, buy all new plastic parts, redo all the wiring, possibly a new motor, clean out the barrel and hopup chamber, and of course get rid of that LiPo since theres no protection of ANY kind on it. Now this isn't the owner's fault, this is a hideous product of someone who didn't have the slightest clue as to what they were doing when they were upgrading this gun. There's a reason systema packages and sells gear GREASE and not gear OIL.

August 31st, 2009, 23:10	#2
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	LOL hehehe noob guntech! lol __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

August 31st, 2009, 23:18	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Welcome to MY world, and also an indication one reason I got out of gun work overall. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

August 31st, 2009, 23:27	#6
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	>.<' jesus... people thinking airsoft guns are car engines......

August 31st, 2009, 23:39	#8
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	There were breaks in the wiring insulation, conductive oil everywhere, running an unprotect lipo in the stock tube. This gun WAS a functional frag grenade. I can't believe I actually test fired this thing before I opened it

September 1st, 2009, 00:07	#9
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	You call that upgrading? That's obviously downgrading. LOL __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

September 1st, 2009, 00:41	#10
Amos Trader rating Join Date: Aug 2006 Location: Japan	JESUS. Specially with a LI-PO setup... You should contact that gun-doc... or find out who it is and contact every single person who's gun that person has worked on... ... lol Time to make "Manitoba Airsoft Association GUNTECH" rules? __________________ Custom Builds: FA3674U Krinkov G3SD6

September 1st, 2009, 00:47	#11
Janus Trader rating Join Date: Sep 2004 Location: Red Deer, AB	whirr pew pew pew pew CHUGGA CHUGGA GRIIIIIIND WANK "The hell? Airsoft guns aren't supposed to go 'chugga chugga grind wank.' " __________________ Age Verifier - Lower Vancouver Island Brotherhood of Nod - Nod Prime \|\| Vancouver Island Airsoft League - President Unavailable for AV until April 2020.

September 1st, 2009, 19:20	#12
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Amos and I have seen an AUG with a tight shimming job that slowed down and sped up as it fired. The original owner claimed that shims "wear in" after time.... Yep....those brass shims pushing against those rotating bearings will wear in REAL quick lol

September 1st, 2009, 19:44	#13
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	every see a shim mushed into the piston?

September 1st, 2009, 19:46	#14
Daiviet Captain Sunshine Trader rating Join Date: Aug 2006	how in gods name?...

September 1st, 2009, 21:05	#15
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	'haven't seen one get smashed into a piston but I've seen one get cut in half! lol

How NOT to lube a mechbox

Doctor's Corner