|
|
|
August 20th, 2009, 17:04
|
#1 |
|
Looking to make the most powerful TM G26
well, you all likely saw my last build, and i think it turned out VERY well. but, i sold the gun, and and now on to the next toy.
gun is a TM G26 with the following additions...... already installed: KM TBB Metal Valve Bulb parts on their way: Guarder enhanced Recoil spring Guarder Enhanced Hammer spring Guarder Steel Recoil Guide Rod Guarder High Output Valve for Marui GLOCK Guarder Steel Trigger Lever for MARUI GLOCK Guarder Steel Magazine Catch for Marui G26 King Arms Air Seal Chamber for Marui GBB Pisto Firefly Rocket Valve and Piston Head Set for Marui MAG Replacement Spring Set for Marui GLOCK Series GBB and finally, if i can ever find one, i will have a STEEL SLIDE on this sucker! BUT, i will use the ABS until i break it, and see where i am from there. i have a lead on a STEEL slide that MAY be able to get me 2 actually, so we shall see. so, what else can i throw at this thing for POWER? any and all thoughts and tips are appreciated. thanks in advance. pic 4 clicks...... 
|
|
|
|
|
August 20th, 2009, 17:54
|
#2 |
|
Replace most of that guarder stuff with Shooter's Design, Airsoft Surgeon, PDI and Firefly parts...
You'll have a much better pistol if you do... Guarder parts are on the lowest end up the upgrade scale IMO. A steel slide is not a good idea, It'll be very sluggish and use ALOT of gas each shot. If you want hard hitting recoil look into a lightweight aluminum slide (Shooter's Design or Airsoft Surgeon) |
|
|
|
|
August 21st, 2009, 10:43
|
#3 |
|
crap, already ordered the stuff
 i may just have to go to an aluminum slide, as the steel ones are so hard to find! i have a lead on one, and if i can get it i will, but if not i will go alum. i can't seem to find a PDI TBB for this one. weird....... |
|
|
|
|
|
August 21st, 2009, 16:58
|
#4 |
|
anyone know if PDI makes a TBB for this turkey?
|
|
|
|
|
|
August 24th, 2009, 13:42
|
#5 |
|
ok, noting from PDI, but i contacted EDGI, let's see if there is anythign they can do for me.
also, metal slide of any material, not possible to find!!!! i am pissed. so, i bought a KJW G27, and will use the metal slide and mag from that, use the TM grip (cause it has the proper trades for the most part) and use all the upgraded parts. then, i will be selling the KJW if anyone wants dibs, it will NEVER be fires, and will have plastic slide and Magazine. Last edited by MikeMcNair; August 24th, 2009 at 13:49.. |
|
|
|
|
|
August 24th, 2009, 18:50
|
#6 | ||
|
Quote:
__________________
 Quote:
|
||
|
|
|
|
August 25th, 2009, 09:15
|
#7 |
|
really? what if i sell it in pieces? and ship at different times? can parts make it over?
|
|
|
|
|
|
August 26th, 2009, 12:34
|
#8 |
|
parts are starting to arrive, pix will be posted soon
|
|
|
|
|
|
September 2nd, 2009, 11:00
|
#9 |
|
FINALLY AN UPDATE!!!!
i have all the good in hand, and will install them shortly. i bought a KJW G27 for the metal slide and barrel since the TM ones are impossible to find. here is the pic of the goodies that came today...  current list:
if anyone has any other suggestions of what to get, please let me know. i feel like i have everything made for the gun, but i am sure i am missing something. also, i live in the US, so i cannot get age verified (even though i am 30) so if anyone has a chance to look in the classifieds for a STEEL slide and barrel, i will gladly pay a finders fee!!!! Last edited by MikeMcNair; September 2nd, 2009 at 11:02.. |
|
|
|
|
|
September 2nd, 2009, 11:31
|
#10 |
|
quick question.... how does one get part 29 off the recoil spring rod?
(part 29 OFF of Part 24?) i would like to use part 25 with the GUARDER recoil spring guide. 
|
|
|
|
|
|
September 3rd, 2009, 10:44
|
#11 |
|
well, got all my parrts in, and sure enough, it doesnt fire. i think i put the firing pin in incorrectly, likely an easy fix.
also, the king arms air seal chamber, yeah, it seems to be too tight (inside diameter) for a pellet to go through. anyone have any thoughts? |
|
|
|
|
|
September 4th, 2009, 10:54
|
#12 |
|
ok, got her firing. the stiker pin that hits the valve on the magazine was loose some how.
this thing shoots pretty well, the King Arms Air Seal Chamber helps a TON. i need to find a 6.01 inner barrel for it if anyone knows of any. smallest i can find is 6.03, and i think that is hindering me. any other things i can do for more power, feel free to let me know. i am open to suggestion. also, will post a video tonight.
|
|
|
|
|
|
September 4th, 2009, 11:17
|
#13 |
|
hello Mike, you are crazy
if at any point you need hop-up rubber, PM me, I'v got some spares 
__________________
|
|
|
|
|
September 4th, 2009, 11:19
|
#14 |
|
thanks bro, i am using the King Arms Air Seal Chamber (the red one) and it made a HUGE difference!!!
check this out......... YouTube - Air seal chamber |
|
|
|
|
|
September 4th, 2009, 11:22
|
#15 |
|
Curious to see the fps on that GBB
__________________
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
