Motor Help

[Alexei]

Im hoping someone can give me some advice. I upgraded too a modify s120 spring, im running my gun on the original dboys motor and i noticed it getting pretty hot. I need some advice as too what parts if any I would need too run my gun without problems on this spring, Thank you.

[yuhaoyang]

16ga+wires, and a good motor. (G&P M120, M140, systema magnum, ect.)

[Alexei]

How come I cant stay with my stock wires. also what can happen if I dont change anything and just use the stock wire and motor. I know about the relation too other parts in the mechbox when you upgrade a spring, I just need help with the motor question. Also is it normal for the motor too be hot with a s120 spring after firing about 3-5 burst of 5-10 rounds. I would really be greatfull for some good help.

[Con Murder]

Originally Posted by Alexei

How come I cant stay with my stock wires.


Also is it normal for the motor too be hot with a s120 spring after firing about 3-5 burst of 5-10 rounds. I would really be greatfull for some good help.

The stock wires don't allow the neccessary amount of energy to flow efficiently. Thus they heat up and reduce the amount of energy needed .


No it is not normal for a motor to get hot after 30 so rounds! It is drawing from the battery all it needs but does not get enough because of low gauge wires. To determine if your motor is sufficient, first requires the wires to be efficient.