G26c frame on G26 (ksc)

Jimski · July 31st, 2009, 16:55

Do the KSC G26C and G26 have the same frame?
I have a 26C frame I'd like to paint OD and put on the 26.
Is that possible?

thanks you a lot.

Thenooblord · July 31st, 2009, 16:56

I believe only the slides are different

johnnyrico · July 31st, 2009, 17:21

I am not certain but I thought they were different...

Wasn't the 26 semi only, and the 26c was select-fire?

My understanding was that the two were not interchangeable...

I seem to remember trying to put a KSC Glock 17 upper on a Ksc Glock 18 lower with no success, hang on time to look at the expolded views of the lowers...

johnnyrico · July 31st, 2009, 17:29

Alright my bad people... according to the diagrams we have in the doctor section, the lowers of the G17 and the G18C are quite similar if not identical, even alot of the part numbers are the same...

Perhaps I just had a pair of gun parts that were being difficult at the time, but nothing in the diagrams indicates that it would not work.

Now unfortunately I could not find views of a 26C, only the 26. But seeing as the 17 and the 18c appear to be good, the 26 and th 26c would be good.

I realise that I have only offered alot of speculation, but hopefully this helps in some way.

Possibly someone on the boards has actually done a swap and could enlighten us?

Tex · July 31st, 2009, 17:32

yes you can do it. but if it is a select fire frame and semi only slide you will need to switch the hammer assembly in the frame to match the slide.

Jimski · July 31st, 2009, 17:53

Quote:

Originally Posted by Tex

yes you can do it. but if it is a select fire frame and semi only slide you will need to switch the hammer assembly in the frame to match the slide.

OK, thanks all!

MikeMcNair · August 3rd, 2009, 11:32

sear is different, but the actual outer frame (part 109) is indeed identical.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 31st, 2009, 16:55	#1
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	G26c frame on G26 (ksc) Do the KSC G26C and G26 have the same frame? I have a 26C frame I'd like to paint OD and put on the 26. Is that possible? thanks you a lot. __________________

July 31st, 2009, 17:21	#3
johnnyrico Trader rating Join Date: Apr 2002 Location: Winnipeg, MB	I am not certain but I thought they were different... Wasn't the 26 semi only, and the 26c was select-fire? My understanding was that the two were not interchangeable... I seem to remember trying to put a KSC Glock 17 upper on a Ksc Glock 18 lower with no success, hang on time to look at the expolded views of the lowers... __________________ "Banning firearms to prevent criminal use of guns is about as smart as banning marriage to prevent spousal abuse, or banning pregnancy to prevent child abuse. " "When just seconds can mean life or death, the police are just minutes away" "If you can read this, thank a teacher... Since it's in English, thank a soldier"

July 31st, 2009, 17:29	#4
johnnyrico Trader rating Join Date: Apr 2002 Location: Winnipeg, MB	Alright my bad people... according to the diagrams we have in the doctor section, the lowers of the G17 and the G18C are quite similar if not identical, even alot of the part numbers are the same... Perhaps I just had a pair of gun parts that were being difficult at the time, but nothing in the diagrams indicates that it would not work. Now unfortunately I could not find views of a 26C, only the 26. But seeing as the 17 and the 18c appear to be good, the 26 and th 26c would be good. I realise that I have only offered alot of speculation, but hopefully this helps in some way. Possibly someone on the boards has actually done a swap and could enlighten us? __________________ "Banning firearms to prevent criminal use of guns is about as smart as banning marriage to prevent spousal abuse, or banning pregnancy to prevent child abuse. " "When just seconds can mean life or death, the police are just minutes away" "If you can read this, thank a teacher... Since it's in English, thank a soldier"

July 31st, 2009, 17:32	#5
Tex Trader rating Join Date: Feb 2003 Location: Abbotsford, B.C.	yes you can do it. but if it is a select fire frame and semi only slide you will need to switch the hammer assembly in the frame to match the slide.

August 3rd, 2009, 11:32	#7
MikeMcNair Trader rating Join Date: May 2009 Location: PA	sear is different, but the actual outer frame (part 109) is indeed identical.

G26c frame on G26 (ksc)

Upgrades & Modifications