Stock G&G peak charger upgrade to Deans

[Shaun655]

Well with the helpful advice from the members of Airsoft Canada I upgraded my gun with a new elite battery from cheapbatterypacks.com and upgraded the gun from its mini connectors to Deans connectors.

I had hoped that the stock charger would take to the Deans plugs, but after they were installed it would not charge, it was flashing an error message. If anyone has done this and it was successful please post your results.

Also for anyone who owns a full stock G&G GR16 the new elite 9.6v 4000mah large cell will just fit no modifications are required to the stock; furthermore if you wish not to upgrade the connector type cheap battery packs will let you choose whatever connector or pack configuration you wish.

[coach]

check the polarity of the connector on the battery. might be reversed.

[Shaun655]

I was checking that out after everything was setup and it didn't appear to be installed incorrectly anywhere, but I will most likely double check just to be sure. I thought that it might be a risk anyway to upgrade the stock charger since Deans is supposed to have a better current flow than a mini connector. I am thinking of getting a duratrax peak charger instead now. Seems like a good price and it supports 8 cell packs, and should be around 60-80CAN depending on where I order it.