Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Pros and cons for m4s and mp5s

:

Newbie Tank

Reply
 
Thread Tools
Old July 7th, 2009, 00:26   #1
vulcan m91
 
Join Date: Jun 2009
Pros and cons for m4s and mp5s

Hey i was wondering if anyone could help me out. Im new and not sure what i want. Is there anything i should know about the m4 and mp5 class of guns. Pros and Cons. Thanks
vulcan m91 is offline   Reply With Quote
Old July 7th, 2009, 00:29   #2
Wilo
 
Wilo's Avatar
 
Join Date: Sep 2008
Location: Renfrew, Ontario
Send a message via MSN to Wilo
All I really know about the M4's is that sometimes the plastic bodies can be unrealiable. They can have twists and creaks, but what else to expect from a toy gun. The mechbox's are reliable out of the box(again, thats only from what I've heard.) and can last a while without upgrades.

Can't say much about an MP5.
Wilo is offline   Reply With Quote
Old July 7th, 2009, 00:39   #3
sarosh
 
sarosh's Avatar
 
Join Date: Jun 2009
Location: St. Catharines Ontario
MP5 for lifemcgife.
sarosh is offline   Reply With Quote
Old July 7th, 2009, 00:39   #4
5.56
 
5.56's Avatar
 
Join Date: May 2007
Location: Burnaby
M4's allow you to accesorize and customize them with thousands of items. You can shorten the barrel, or make it longer. MP-5's, however, will only allow you to mount a scope and a flashlight.
5.56 is offline   Reply With Quote
Old July 7th, 2009, 00:41   #5
scurvythepirate
 
scurvythepirate's Avatar
 
Join Date: Nov 2007
Location: Kelowna,BC
Pros and Cons

There are many pros and cons between the two airsoft guns. Really these two along with an AK-47 are guns in which parts/accesories are common.

Pros M4:
Parts
V2 Mechbox
Feel
Length
Lighter Weight
Rail Built in
Adjustable stock (usually)
Sights (easy to aim)
Adaptability

Cons:
A pain for left handed people
Plastic parts
Everyone has them
Stock (can be wobbly)
Weight (somepeople complain about the weight)


MP5 Pros:
Lightweight
Compact
Comfortable
Parts
V2 Mechbox
Kickass look
Adaptability (for your needs)

Cons:
Size
Sights (i find it hard to look through compaired to a M4)
Range (not that long of barrel so not as long range)
__________________
scurvythepirate is offline   Reply With Quote
Old July 7th, 2009, 00:42   #6
venture
 
venture's Avatar
 
Join Date: Jun 2005
Location: Halifax
MP5:
Pros: Small and manouerverable. Possible folding stock for more compactness. small size mags. Mechbox v2 and v3-proven designs with many upgrade parts available. Kurz model can be used as powerful secondary. Fully ambidextrous.


Cons: Short barrel causes accuracy problems sometimes. Many models have problems with selector switch. Pretty common(that may be a plus for some).
__________________

Visit us at :www.ventureairsoft.ca
venture is offline   Reply With Quote
Old July 7th, 2009, 10:28   #7
Frozencricket
 
Frozencricket's Avatar
 
Join Date: Jul 2006
Location: Ottawa
M4

Cons:
- everyone has one
- V2 mechbox (even if it's common and easy to work with, it will probably break if you upgrade the spring)

Pros:
- too many accessories to count
- everyone has one (which means you can swap mags easily)

MP5:
Cons:
- really short inner barrel does not lead to good accuracy at long range
- not as many accessories as the M4

Pros:
- V2 mechbox (it has some support at the front and it is less likely to break)
- light and compact

Go with what you like. I recommend AKs and G36s.
__________________
Ottawa Airsoft http://ottawa-airsoft.com/
Frozencricket is offline   Reply With Quote
Old July 7th, 2009, 11:00   #8
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
Don't think there's any more support at the front of an MP5 for the mechbox than with the M4. Version 2's are fine. Reinforced mechbox shell (a good one...not the crap clone stuff), 380-ish range, don't play in the cold and it'll last for a long, long time. In a TM mechbox...it's much the same, but I'd stay in the 350-ish range to take the sting out of it.

Lots of the pros/cons are covered already.

Fit the rifle to you. Some guys don't feel good behind an MP5. They find sighting impossible without a high optic mount (typically while using PB goggles). Some guys find the M4 too long for them, it'll hit the ground/etc...when they kneel going for a secondary.

Fit the rifle to where you're playing. If it's tight indoor CQB...the M4 is going to seem long. If you're not careful, you'll find your rifle sticking out around corners/through windows/etc...before you're ready to sight and shoot back. That and you'll find you're banging it into walls, doors, etc....

For outdoor games, the longer barrel helps a lot. Some guys will stick a long inner into an MP5 and hide it with a suppressor to get more accuracy at range.

Collasible stock MP5's are the pits for batteries. With a full stock MP5 you can run a big battery in the stock. Otherwise you'll be cursing dead batteries in the foregrip after a season of steady play. Anyways...with a full stock, the MP5 is not a huge amount smaller than a collasped M4...especially if it's a M4CQBR.

I find MP5 mags to be hard to store, both in a rig and in a dump pouch....they're long. Granted...my stuff is setup for M-series rifles.

I've had/build/worked on several of each. I much prefer the M4. I use it for both indoor and outdoor.

With the exception of CA/ICS MP5's...the M-series is easier to work on. "TM" style MP5's are not favourites to work on.

Metal rules. Here's what I'd get if I were to buy AEGs again and had to pick an "off the shelf" model.

M4:
- Classic Army
- G&G
- KA

MP5:
- CA MP5 full stock
- ICS MP5 full stock

I'd get a full M4A1 style and a CQB one. The mags and batteries would be interchangeable. The CQB would be set to indoor (sub 350) and the other to (380-390). The CQB would be the backup rifle for outdoor games...a pistol would be the backup for indoor games. One rig setup for both rifles. Rails and lights and stuff for the CQB. Light and lean for the M4 field rifle.

Anyways, best of luck.

Tys
m102404 is offline   Reply With Quote
Old July 7th, 2009, 20:49   #9
venture
 
venture's Avatar
 
Join Date: Jun 2005
Location: Halifax
Gotta go away for a couple days, but I see a couple of things that aren't quite errors but could use some clearing up.

Everyone is saying that the m4 and the mp5 have v2 mechboxes. This is true, but the Mp5k models have v3 mechbox.

Also m102404 talked about how difficult it can be storing the mp5 mags because of their length. However, Mp5 short mags are quite small, although of low capacity. They are roughly half the size of long mp5 mags; much like pistol mags.
__________________

Visit us at :www.ventureairsoft.ca
venture is offline   Reply With Quote
Old July 7th, 2009, 21:00   #10
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Quote:
Originally Posted by Frozencricket View Post
M4

Cons:
- V2 mechbox (even if it's common and easy to work with, it will probably break if you upgrade the spring)

Pros:
- V2 mechbox (it has some support at the front and it is less likely to break)
- light and compact
Hunh? You're contradicting yourself. You were correct with the top one, sort of. V2's are more prone to breaking with heavier springs or sooner than other mechboxes due to stress (usually from a heavier spring).
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old July 7th, 2009, 22:17   #11
Kuro_Neko
 
Kuro_Neko's Avatar
 
Join Date: Aug 2008
Location: St. John's, Newfoundland
Send a message via ICQ to Kuro_Neko Send a message via AIM to Kuro_Neko Send a message via MSN to Kuro_Neko Send a message via Yahoo to Kuro_Neko
I can't really speak to the other comments made but the problem with mp5 mags isn't their length but rather their width, or lack there of. The most common pouch type out there is for m4 mags, which can be used in a pinch for ak, g36, m14 mags but using them for mp5 mags, unless you use mag clamps, tends to cause rattle. Finding mag pouches made specifically for mp5 mags is a bit of a pain.
__________________
Kuro_Neko is offline   Reply With Quote
Old July 7th, 2009, 22:20   #12
lemegacool
 
lemegacool's Avatar
 
Join Date: Aug 2008
Location: notre dame des prairies /quebec
Quote:
Originally Posted by Kuro_Neko View Post
I can't really speak to the other comments made but the problem with mp5 mags isn't their length but rather their width, or lack there of. The most common pouch type out there is for m4 mags, which can be used in a pinch for ak, g36, m14 mags but using them for mp5 mags, unless you use mag clamps, tends to cause rattle. Finding mag pouches made specifically for mp5 mags is a bit of a pain.
solution: buy drop leg mp5 mag pouch ... costs like 9.99 at ehobby... i have 2 they are great. thats how i carry mines
__________________

member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry
lemegacool is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 13:52.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.