Best buy for upgrade ?

devodka · April 27th, 2009, 20:08

Hey, I just bought myself a VSR-10 Marui Clone from http://buyairsoft.ca.
I was wondering if I could upgrade it and where could I buy these upgrades from (best deal)

thanx, Devodka.

Erennert · April 27th, 2009, 20:13

You already found it.

kalnaren · April 27th, 2009, 20:15

What do you want to upgrade?

To make a sniper rifle really effective, you're looking at somewhere between $500 and $1,000 more in parts. But again, this depends on exactly what it is you want to replace.

devodka · April 27th, 2009, 20:28

I'd like to increase the fps on it ? But I wouldn't know where to start. Like the spring ?

brently0725 · April 27th, 2009, 20:34

I've got over $1000 in extras in my TSD VSR clone I bought for like $300 from buyairsoft.ca (It came with a scope but no scope mounts from them). And I still want more. The hop up unit sucks. I have put Laylax everthing into it (zero trigger w/ piston, cylinder, cylinder head, bolt handle, bearing spring guide and 170 spring). The piston/trigger sears WILL break very soon on the stock unit. I like where mine is at now but I need to get an upgraded hop up unit and a tighter bore barrel. I would recomend a 6.03 mm at the biggest. I was stupid and bought the PDI 6.05 mm and the stock barrel was tighter. LOL. I stuck a silencer adapter in the end of mine after I took out the orange plastic tip and made a silencer out of teflon on my buddy's lathe. Then I put the longer barrel in and the new silencer hides it nicely.

kalnaren · April 27th, 2009, 20:37

Quote:

Originally Posted by devodka

I'd like to increase the fps on it ? But I wouldn't know where to start. Like the spring ?

I don't recommend increasing the FPS. That will give you absolutly ZERO performance enhancement. This rifle is pretty close to field limits stock anyway.

First, I'd recommend replacing the stock barrel with an aftermarket tightbore, as well as a new hop-up chamber and rubber. Beyond that I'll let people who have actually upgraded theirs give advice.

devodka · April 27th, 2009, 20:38

Quote:

Originally Posted by brently0725

I've got over $1000 in extras in my TSD VSR clone I bought for like $300 from buyairsoft.ca (It came with a scope but no scope mounts from them). And I still want more. The hop up unit sucks. I have put Laylax everthing into it (zero trigger w/ piston, cylinder, cylinder head, bolt handle, bearing spring guide and 170 spring). The piston/trigger sears WILL break very soon on the stock unit. I like where mine is at now but I need to get an upgraded hop up unit and a tighter bore barrel. I would recomend a 6.03 mm at the biggest. I was stupid and bought the PDI 6.05 mm and the stock barrel was tighter. LOL. I stuck a silencer adapter in the end of mine after I took out the orange plastic tip and made a silencer out of teflon on my buddy's lathe. Then I put the longer barrel in and the new silencer hides it nicely.

OKK, so where could I purchase this spring? Any website I should specifically visit ?

devodka · April 27th, 2009, 20:40

Quote:

Originally Posted by kalnaren

I don't recommend increasing the FPS. That will give you absolutly ZERO performance enhancement. This rifle is pretty close to field limits stock anyway.

First, I'd recommend replacing the stock barrel with an aftermarket tightbore, as well as a new hop-up chamber and rubber. Beyond that I'll let people who have actually upgraded theirs give advice.

kk.thanks, I think I'm just gonna re-sell it to one of my friends when it arrives

Styrak · April 27th, 2009, 20:40

If you don't know what to upgrade or why, you shouldn't really be upgrading your gun. Play with it stock for a while and see what you like and don't like about it.

Erennert · April 27th, 2009, 21:57

You can't JUST buy a spring either, or it will wreck your internals. If it's a higher FPS spring, you will have to upgrade some other things so your mechbox won't take a beating.

BeAcH · April 27th, 2009, 22:02

Quote:

Originally Posted by Erennert

You can't JUST buy a spring either, or it will wreck your internals. If it's a higher FPS spring, you will have to upgrade some other things so your mechbox won't take a beating.

He doesnt have a mechbox, hes running a BASR.....the most likely thing he will break by increasing his fps is his trigger seer....

Styrak · April 27th, 2009, 22:18

Quote:

Originally Posted by Erennert

You can't JUST buy a spring either, or it will wreck your internals. If it's a higher FPS spring, you will have to upgrade some other things so your mechbox won't take a beating.

Haha, you always talk about people's mechboxes when they're running bolt action sniper rifles

Erennert · April 27th, 2009, 23:09

Quote:

Originally Posted by Styrak

Haha, you always talk about people's mechboxes when they're running bolt action sniper rifles

:banghead: I'm so slow sometimes, sorry about that and forget my posts....

And just curious, when have I done that? :P

Styrak · April 27th, 2009, 23:15

Quote:

Originally Posted by Erennert

:banghead: I'm so slow sometimes, sorry about that and forget my posts....

And just curious, when have I done that? :P

I dunno, I've just seen it a few times.

Erennert · April 27th, 2009, 23:20

Oh well... next time I'll double check the post

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 27th, 2009, 20:08	#1
devodka Trader rating Join Date: Nov 2007 Location: NB,Canada	Best buy for upgrade ? Hey, I just bought myself a VSR-10 Marui Clone from http://buyairsoft.ca. I was wondering if I could upgrade it and where could I buy these upgrades from (best deal) thanx, Devodka.

April 27th, 2009, 20:34	#5
brently0725 Trader rating Join Date: Apr 2006 Location: Mission, BC	I've got over $1000 in extras in my TSD VSR clone I bought for like $300 from buyairsoft.ca (It came with a scope but no scope mounts from them). And I still want more. The hop up unit sucks. I have put Laylax everthing into it (zero trigger w/ piston, cylinder, cylinder head, bolt handle, bearing spring guide and 170 spring). The piston/trigger sears WILL break very soon on the stock unit. I like where mine is at now but I need to get an upgraded hop up unit and a tighter bore barrel. I would recomend a 6.03 mm at the biggest. I was stupid and bought the PDI 6.05 mm and the stock barrel was tighter. LOL. I stuck a silencer adapter in the end of mine after I took out the orange plastic tip and made a silencer out of teflon on my buddy's lathe. Then I put the longer barrel in and the new silencer hides it nicely. __________________ -TM AK Beta Spetz -TM MP5 SD5 -TSD VSR10 -Ares G39C -A&K Tan Magpul Masad -We Tech M9 Tac Masterling -1Tornado Impacts V2/3 Gun Doc and BA experience

April 27th, 2009, 20:40	#9
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	If you don't know what to upgrade or why, you shouldn't really be upgrading your gun. Play with it stock for a while and see what you like and don't like about it. __________________ Airsoft Sales and Repair/Upgrade Services Last edited by Styrak; April 27th, 2009 at 23:15..

April 27th, 2009, 20:28	#4
devodka Trader rating Join Date: Nov 2007 Location: NB,Canada	I'd like to increase the fps on it ? But I wouldn't know where to start. Like the spring ?

Best buy for upgrade ?

Upgrades & Modifications