|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 30th, 2009, 10:32 | #1 |
CYMA akm metal
Hi guy, just bought my first AEG. The model I found was the .036 AKM of CYMA. Of course, having the choice, I would have choosen the .048 AK-47 with wood and metal. But being in Canada, things are differents.
There is plenty of good reviews out there on the web of the CYMA ak clones already. So I will give only my opinion. External It looks very good for a cheap clone. The fake wood look is very convincing. But plastic remain plastic. There are some nicks and scratchs on the metal receiver, nothing some loves or a new paint can't cover. I read before buying it about the scratch under the selector. But keeping in mind that it is a cheap clone, I'm still very satisfied. A downpoint is the full plastic bright orange magazine that I find very, very cheap. Almost everything that should be metal is metal, but you get this very lightweight cheap mag. It does feed well but I already ordered an Echo 1 metal hi capa. The thread at the end of the outer barrel is - clockwise and remove easily to attach a silencer. Internal I didn't went in the gear box since I have no experience yet but I did disassemble the gun in two half. It is preaty easy to do so, removing the inner barrel is easy too. Hop up adjust with a lever. Also the large batterie fit very thight in the stock. Accessories The gun come with an outdated large 8.2v 1200mah NiCd batterie. The charger is a 220v european standard so you will need a 5$ transformer to fit it to 110v. It comes with a cleaning rod that, yes, broke in my inner barrel while cleaning (my bad). Performance The gun fire at 470fps max, but usualy turn around 460fps. This is with hop up to off position. I didn't catch of to test rof but it says around 700-800 rpm with a 8.2v. Upgrades The things I wood like are: - AKM wood kit (it can't seem to exist if you read on the net that the rear of the CYMA akm receiver does not fit 99.9% of the wood kit out there. I will in the end order a wood kit an work it to make it fit, sanding and wood filling). Ordered the ak-47 G&P Wood kit + AK-47 G&P lower and uper receiver - 10.8v NiMh 3600mah. - PSOP scope - PSB1 silencer. This what it look likes with a new paint job and an Echo 1 metal hi capa magazine Last edited by Sim123456; April 8th, 2009 at 16:41.. |
|
March 30th, 2009, 16:56 | #2 |
i have the 036.a with the full wood kit
and man is it sexy |
|
March 30th, 2009, 17:39 | #3 |
Did you bought the wood version or you found a wood kit?
|
|
March 30th, 2009, 19:11 | #4 |
Banned
|
actually cyma released a blowback AKM recently,the same version as this one.
|
March 30th, 2009, 19:36 | #5 |
bought the wood version
it's a ukarms wood kit on it you probably could buy it from them |
|
March 30th, 2009, 19:36 | #6 |
actually cyma have a new full steel version out
VFC/Inokatsu clone the cm048m |
|
March 31st, 2009, 08:20 | #7 |
Those new CYMA are very hot for the price, full metal, laminated wood, 450fps + etc.
For the wood kit, I never found a place to buy specific CYMA parts. If you know of one, please tell me |
|
March 31st, 2009, 11:43 | #8 | |
Buy real-steel foregrips....20 minutes or less with a dremel makes them fit perfect.
__________________
Quote:
|
||
March 31st, 2009, 11:45 | #9 |
gza was selling his akm wood kit after a butcher sale on the forums
search it up might still be up for grabs slim |
|
March 31st, 2009, 11:50 | #10 | |
Quote:
Real wood feels SO nice compared to airsoft wood. (imo)
__________________
Johann Hansen. 1./SS-Pz-Gren. Rgt. 20. 9th SS Hohenstaufen. Ontario's Largest WW2 re-enactment. OP Woodsman. Join us! |
||
March 31st, 2009, 14:03 | #11 | ||
AK Guru
|
Quote:
Quote:
Half steel.
__________________
|
||
March 31st, 2009, 20:48 | #12 |
I saw a Steel parts AKM wood kit on Boom Arms Airsoft but they don't answer my e-mails.
So, I don't understand completly Ancorp (I'm french poor me). Would you or someone else tell me wich kit would fit the easiest on the CYMA akm receiver? I would be great. If not, I was think on going with a G&P receiver and turn it into an AK-47 (with a G&P wood kit). Good idea? |
|
April 1st, 2009, 21:43 | #13 |
slim like i said GZA butchered one
Airsoft Canada this is the link for the sale he has a furniture kit for 30 bucks |
|
April 2nd, 2009, 08:52 | #14 |
These are the same plastic wood I have
|
|
April 2nd, 2009, 21:26 | #15 |
Loves Justin Bieber ♥
|
Hey little question here you little AK knowledge base brains
Does this AKM Wood kit would fit Kraken? Thank -Mart |
|
Bookmarks |
|
|