Maruzen aps2 sv question

M24man · February 14th, 2009, 14:30

When i first got my maruzen out of the box i would pop in the mag shoot and nothing would happen except the BB coming out of the barrel when I tipped it over barrel first. It looks llike there might be a gas valve or whatever on the bolt but i got this gun from airsoftextreme completely stock and I know it's a spring rifle (well i think so). What should I do?

CDN_Stalker · February 14th, 2009, 14:50

Dial in hop up. Most new guns are shipped with the hop up set full off, therefore the BB has nothing to rest against to hold it in the barrel. So dial in hop up and the "problem" should be fixed.

And it's a spring gun, no idea what gas valve you are talking about. And if it's a bone stock APS2 then it has a fixed hop up. APS2/CA M24 mags are the same (I bring up because when the feed lips get chewed up, double feeding occurs), sounds like maybe you might be double feeding the gun when loading actually, each time the bolt gets pulled back, even an inch, and released, it loads a BB. Learn to pull the bolt back FULLY and shove forward once. Overall problem could just be a "User" issue and not a gun issue.

Dracheous · February 14th, 2009, 15:58

Maruzen APSII SV does not come with adjustable hop-up stock Stalker.

Poor airseal on the piston/cylinder heads could be the issue here. Or the barrel is in dire need of a cleaning.

There is a long list of reasons why the round is not coming down the barrel, but I doubt this is a hopup issue because its a non-adjust. I would suggest investing in either the PDI or areochamber units. I suggest the PDI simply because it is much more affordable and you can use any standard inner barrel cut you choose with it.

While you're at it, I would suggest upgrading the bolt and piston as well. There are some APSII builds in the media section as well the upgrade section. All the parts that I would list from my build a few years ago won't do you much since most of those parts now are out of production for almost 2 years.

M24man · February 14th, 2009, 16:54

Now I went to check my gun out and the bolt doesn't even come back a cm. also when it did you would have to apply force on the push forward not the pull back to cock it, which is different from my m24 and type 96's cocking.

anyone?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 14th, 2009, 14:30	#1
M24man Trader rating Join Date: Dec 2008 Location: USA	Maruzen aps2 sv question When i first got my maruzen out of the box i would pop in the mag shoot and nothing would happen except the BB coming out of the barrel when I tipped it over barrel first. It looks llike there might be a gas valve or whatever on the bolt but i got this gun from airsoftextreme completely stock and I know it's a spring rifle (well i think so). What should I do?

February 14th, 2009, 14:50	#2
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Dial in hop up. Most new guns are shipped with the hop up set full off, therefore the BB has nothing to rest against to hold it in the barrel. So dial in hop up and the "problem" should be fixed. And it's a spring gun, no idea what gas valve you are talking about. And if it's a bone stock APS2 then it has a fixed hop up. APS2/CA M24 mags are the same (I bring up because when the feed lips get chewed up, double feeding occurs), sounds like maybe you might be double feeding the gun when loading actually, each time the bolt gets pulled back, even an inch, and released, it loads a BB. Learn to pull the bolt back FULLY and shove forward once. Overall problem could just be a "User" issue and not a gun issue. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

February 14th, 2009, 15:58	#3
Dracheous Lego Head Trader rating Join Date: Nov 2005 Location: Gatineau, that's right I'm in QUEBEC!	Maruzen APSII SV does not come with adjustable hop-up stock Stalker. Poor airseal on the piston/cylinder heads could be the issue here. Or the barrel is in dire need of a cleaning. There is a long list of reasons why the round is not coming down the barrel, but I doubt this is a hopup issue because its a non-adjust. I would suggest investing in either the PDI or areochamber units. I suggest the PDI simply because it is much more affordable and you can use any standard inner barrel cut you choose with it. While you're at it, I would suggest upgrading the bolt and piston as well. There are some APSII builds in the media section as well the upgrade section. All the parts that I would list from my build a few years ago won't do you much since most of those parts now are out of production for almost 2 years. __________________ _________________________________ "The hydrogen economy car from the people who brought you the 'Hindenburg'" - Glen Foster Condoms do not guarantee safe sex any more. A friend of mine wore one and was shot by the woman's husband!

February 14th, 2009, 16:54	#4
M24man Trader rating Join Date: Dec 2008 Location: USA	Now I went to check my gun out and the bolt doesn't even come back a cm. also when it did you would have to apply force on the push forward not the pull back to cock it, which is different from my m24 and type 96's cocking. anyone? Last edited by The Saint; February 14th, 2009 at 18:41..

Maruzen aps2 sv question

Airsoft Guns Discussion