G36 Spring

[FireRat]

How do I get to the spring in the G36? I have the mechbox out but do I have to take apart the hole thing to get to it? or can I just kinda take the spring out?

[kalnaren]

You have to dissassemble the mechbox.

Look at www.mechbox.com

They have vids showing how to do it.

[FireRat]

But the G36 is v3 is it not? I can only find v2

[Dusti69]

Originally Posted by FireRat

But the G36 is v3 is it not? I can only find v2

http://http://www.mechbox.com/mechbo...spring-upgrade

all you had to do was search for "v3"

[FireRat]

Never mind I found it, I think i wont touch the mechbox until I get my last upgrade part I need...

[Dusti69]

smart move
re-watch the vid a couple times before you open it. it will help you out a whole lot

[FireRat]

I understand it but damn if I open it for a spring I might as well replace everything!

[kalnaren]

Don;t forget to trip the anti-reversal latch before opening it up

[Styrak]

Originally Posted by kalnaren

Don;t forget to trip the anti-reversal latch before opening it up

Not really necessary but ok.

[kalnaren]

Originally Posted by Styrak

Not really necessary but ok.

Not necessary until 50% of your mechbox's internal components end up halfway across the room

[Dusti69]

what do you mean by tripping the anti-reversal latch?
i thought you held the spring guide down with a screw driver to keep everything from flying out

[Wrath144]

Holding only the spring guide... only holds the spring guide...