|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
November 17th, 2008, 10:35 | #1 |
Metal Hop Up and Plastic Receiver
hey i was just wondering... is it possible on an m4 to use a metal hop up with a plastic receiver if you just dremel out enough room for it to fit through in the lower?
im not really sure i wanna do it but i have a spare metal hop unit and my brothers s-system has a plastic body and he isnt into making them all metal. he doesnt care about that so it wont ever be getting a metal body bought for it, and then i have this metal hop up just layin around that id like to get some use out of im just wondering cuz it seems simple enough but im not gonna attempt to mod the lower receiver and end up ruining it by finding out that the parts are too different to be able to work together
__________________
|
|
November 17th, 2008, 10:38 | #2 |
Red Wine & Adderall
|
Yes, it is very possible to do so.
__________________
"Its only a little bit on fire" |
November 17th, 2008, 10:46 | #3 |
is that all that needs done is to just dremel out enough room in the spot where the plastic one sits?
__________________
|
|
November 17th, 2008, 11:27 | #4 |
Yes.
|
|
November 17th, 2008, 11:33 | #5 |
cool thanks. i guess ill put that in his gun now
__________________
|
|
November 17th, 2008, 11:50 | #6 |
reassembly is a bitch though
|
|
November 17th, 2008, 11:57 | #7 |
yea which i just found out after taking his gun in half. i didnt account for the air nozzel sticking out and then the front of the lower. i wasnt about to cut it up that much to make room for it to slide through and said the hell with it. he didnt even care about the metal hop up anyway so why waste my time goin through a bunch of trouble if he dont give a shit. ill just add it to the things im gonna put up for sale eventually on a forum down here
__________________
|
|
November 17th, 2008, 11:57 | #8 |
Good job on...accomplishing nothing?
|
|
November 17th, 2008, 11:58 | #9 |
wasted some time at least. i need to stop staying up all night
trash the thread i dont care about it anymore
__________________
|
|
November 17th, 2008, 13:22 | #10 |
A-56 aka Mr.Hitman
|
Should've just bought a 2 piece hop up.
I find the 2 piece hop up more better than the 1 piece. |
November 17th, 2008, 20:52 | #11 |
i didnt buy it. well not directly anyway. it just came with a huge box of parts that id bought for all the ics ak74 parts it had in it. his gun already has a 2 piece plastic one in it thats workin fine
__________________
|
|
November 17th, 2008, 21:08 | #12 |
You can assemble it quite easy.
Simply place the inner/hop-up where it will be when the gun is closed. Then insert it through the outer barrel. And close the receiver. |
|
|
Bookmarks |
|
|