|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 13th, 2008, 22:35 | #1 |
Problem with mag bbs stuck
Hi
On sunday i play my first game of airsoft. A lot of fun but i have a problem. I have a pack of 10 lowcap star for my g36c and when i put the mag on the gun i can shot about 10 or 5 bbs and in the mag the bbs block. When you look inside you see two bbs block inside. A guy told me to buy some LUB for airsoft it ok this http://www.airsoftparts.ca/store2/in...roducts_id=447 put 2 or 3 ml on every mag and left the mag on my table(up) like this . But i have a game on saturday and i will not receive the lub before this do you have a tip for me for not the bbs block on my mags for the saturday game. Thank Last edited by SGT_Blaster; October 14th, 2008 at 08:56.. |
|
October 13th, 2008, 22:48 | #2 |
Im pretty sure you can find some silicone lube at canadian tire or at a store that sell airtools.
|
|
October 13th, 2008, 22:52 | #3 |
sorry double post
|
|
October 13th, 2008, 23:46 | #4 |
Or you can get silicone oil at a hobby store. Just but some RC Shock oil, lowest weight you can get, usually 10wt.
|
|
October 14th, 2008, 00:04 | #5 |
ok thank guy but if i find some lub in hobby shop or canadian tire can i use this lub and dont buy the lub in airsortpart.ca or the lub in hobby shop it just for emergency
|
|
October 14th, 2008, 08:57 | #6 |
i forgot hom many ml silicon oil i put on every mag
|
|
October 14th, 2008, 09:43 | #7 |
All you need is 2-3 drops in every mag. Too much and you'll get Sili oil everywhere. :|
|
|
October 14th, 2008, 10:05 | #8 |
Put a couple of drops of oil in your mags, then full load them with bbs. Then unload them, and load them agian... Do this a couple of times. It will spread the oil evenly inside your mag... Putting in a few drops and letting it sit won't help much.
__________________
|
|
October 16th, 2008, 16:11 | #9 |
Ok now i find some silicone oil at the hobby shop but the guy have just the grade 20 for shock oil. This morning i put some oil in my low caps and im starting shootting and the same problem happen again the bbs is stock in the low caps after 20 round of a low caps of 30 round. after two charging of bbs it the same problem. Do you think it better to put some 2 or 3 drop of silicone oil and dont touch the low caps for 24 hour. Because a lot of person said to me 24 h and a lot of person said to me oil,charge shot, recharge,shot. . And second question can my bbs can be cheap. I have 0.20 bbs bio white ???
|
|
October 16th, 2008, 17:43 | #10 |
i had that problem too with my star m4 mags it the quality of ammo thats the solution to youre problem i guarantee those bio whits aree good in hicaps but real caps they sucks b uy some good stuff from bbbastard
__________________
airborneboi69 |
|
October 16th, 2008, 17:47 | #11 |
Don't use bio BB's. Use some high quality ones.
|
|
October 16th, 2008, 18:37 | #12 |
In conclusion it my bbs the problem ok thank i gonna buy some new bbs from bbsstandard
|
|
October 16th, 2008, 19:02 | #13 |
You might try BB Bastard first
|
|
November 6th, 2008, 13:19 | #14 |
When i lub my mags, I use the loading rod to move the inside up and down and it work well...
My 2 cents. |
|
November 6th, 2008, 13:56 | #15 |
A Total Bastard
|
could also be the mag isn't sitting in the mag well conversion good enough. ever think of that. I've known people shim the magwell conversion with velco inside the well to tighten it up.
try holding you hand under the mag pushing up on it and fireing. Last edited by testtube; November 6th, 2008 at 14:03.. |
|
Bookmarks |
|
|