ics tappet plate replacement.

GreyFox132 · September 4th, 2008, 17:48

Hi im just making sure that any v2 tappet plate with work with an ics v2 mp5 gearbox. Thanks for any help

HaZarD SFD · September 4th, 2008, 18:25

Yes any Ver2 Parts will work in an ICS.

As for an M4
Only parts that are different are the mechbox, Anti reversal and hopup unit.. other than that its pretty much all the same.. oh and Bodies.. as You cannot get a aftermarket replacment..

MP5 shouldnt be much different.

GreyFox132 · September 4th, 2008, 18:29

okay thank you very much

gvanzeggelaar · September 4th, 2008, 23:20

I have replaced this tappet plate. I got a gaurder version II one from airsoftparts.ca. I found this one worked the best with ICS mechbox. The deepfire one, not so much.

mcguyver · September 4th, 2008, 23:32

ICS tappet is slightly wider in the body than any other tappet. You can use another tappet in an ICS gun, but not vice versa. The ICS tappet will not move when installed in a Marui mechbox for example. If you look at an ICS tappet, you can clearly see where the extra material is, as it's an extra couple thousandths of an inch thick and the moulding seam is visible.

GreyFox132 · September 5th, 2008, 09:23

hmmm thanks for the info mcguyver. Im ordering a modify v2 tappet plate. That should work right? I hate how certain brands have their own designs and make things iffy

ScooterVauto · April 13th, 2011, 00:14

Hi Folks, I know this is ancient Thread but how did it work out???
A buddy blew a stock piston first game out, I replaced it with a TM piston but
before reassembly i noticed the
tappet was mushrooming at the point where the Tab is hit by the sector gear.

I tried a used one i had but it cycled and then broke off the spring hook on said tappet,
I tried a Tm one and same thing, I have a Modify in my hand but dont really want
to toss $14 to the wind.

Other the the guarder, did the Modify tappet Work properly?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 4th, 2008, 17:48	#1
GreyFox132 Trader rating Join Date: Jul 2007 Location: Barrie Ontario	ics tappet plate replacement. Hi im just making sure that any v2 tappet plate with work with an ics v2 mp5 gearbox. Thanks for any help

September 4th, 2008, 18:25	#2
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	Yes any Ver2 Parts will work in an ICS. As for an M4 Only parts that are different are the mechbox, Anti reversal and hopup unit.. other than that its pretty much all the same.. oh and Bodies.. as You cannot get a aftermarket replacment.. MP5 shouldnt be much different. __________________ No Comment.

September 4th, 2008, 23:32	#5
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	ICS tappet is slightly wider in the body than any other tappet. You can use another tappet in an ICS gun, but not vice versa. The ICS tappet will not move when installed in a Marui mechbox for example. If you look at an ICS tappet, you can clearly see where the extra material is, as it's an extra couple thousandths of an inch thick and the moulding seam is visible. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

September 4th, 2008, 18:29	#3
GreyFox132 Trader rating Join Date: Jul 2007 Location: Barrie Ontario	okay thank you very much

September 4th, 2008, 23:20	#4
gvanzeggelaar Trader rating Join Date: Oct 2007	I have replaced this tappet plate. I got a gaurder version II one from airsoftparts.ca. I found this one worked the best with ICS mechbox. The deepfire one, not so much.

September 5th, 2008, 09:23	#6
GreyFox132 Trader rating Join Date: Jul 2007 Location: Barrie Ontario	hmmm thanks for the info mcguyver. Im ordering a modify v2 tappet plate. That should work right? I hate how certain brands have their own designs and make things iffy

April 13th, 2011, 00:14	#7
ScooterVauto Trader rating Join Date: Jun 2010 Location: Edmonton	Hi Folks, I know this is ancient Thread but how did it work out??? A buddy blew a stock piston first game out, I replaced it with a TM piston but before reassembly i noticed the tappet was mushrooming at the point where the Tab is hit by the sector gear. I tried a used one i had but it cycled and then broke off the spring hook on said tappet, I tried a Tm one and same thing, I have a Modify in my hand but dont really want to toss $14 to the wind. Other the the guarder, did the Modify tappet Work properly? __________________ A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on! ========== Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern" Lt. Alexander Washington -(Red Tails 1944) Ret.

ics tappet plate replacement.

Doctor's Corner