Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

KSC G18c to G17 Conversion?

:

Upgrades & Modifications

Reply
 
Thread Tools
Old August 3rd, 2008, 19:58   #1
Wilson
 
Wilson's Avatar
 
Join Date: Aug 2003
Location: Ottawa, ON
KSC G18c to G17 Conversion?

Is it possible to convert a KSC G18c into a G17?
__________________
IN OMNIA PARATUS
Wilson is offline   Reply With Quote
Old August 3rd, 2008, 20:07   #2
Tex
 
Tex's Avatar
 
Join Date: Feb 2003
Location: Abbotsford, B.C.
yes well maybe but it's more work then I would want to do.They use the same frame you need to change the FULL hammer assembly in the frame + the slide and everything in the slide. and after that if may or may not work.
__________________
W-69

_/|
Tex is offline   Reply With Quote
Old August 3rd, 2008, 20:25   #3
Wilson
 
Wilson's Avatar
 
Join Date: Aug 2003
Location: Ottawa, ON
Sounds like I'd have to practically buy a G17 anyway just to make it work. Screw it, I'll just buy a G17.

I'm partial to Glock sidearms after having mine for so long.
__________________
IN OMNIA PARATUS
Wilson is offline   Reply With Quote
Old August 3rd, 2008, 20:34   #4
hattrick
NAAZ's #1 fan!
 
hattrick's Avatar
 
Join Date: Aug 2005
Location: Toronto
Send a message via MSN to hattrick
Not possible.....prove me wrong
__________________
Quote:
Originally Posted by Brian McIlmoyle View Post
you are going to die..

maybe not from this .. and probably not today... but I assure you, you will die
hattrick is offline   Reply With Quote
Old August 3rd, 2008, 20:38   #5
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
It's possible, but you'll need to change a significant number of the hammer/disconnect/sear mechanism as well as the entire blowback unit as well as slide.

Finding all of those parts is pretty difficult, unless you can find a junker G17 somewhere (although it's generally those parts in particular that break prematurely.)

You're better off just buying a new one.

I'd actually recommend the Marui Glock 17...
ILLusion is offline   Reply With Quote
Old August 5th, 2008, 23:23   #6
DarkAngel
* Age Verifier status suspended *
 
DarkAngel's Avatar
 
Join Date: Jun 2006
Location: Scarborough
Send a message via MSN to DarkAngel
It is possible, no doubt about it. Im a KSC Distributor. I can get you parts directly from the factory in japan.

The main differences, are the slide, hammer assembly, selector assembly, etc. There are some others as well but i cant remember off the top of my head. Gimme a PM if your serious about this.

Cheers,
DarkAngel
__________________

Certified Sniper Clinic Instructor and Counter Sniper
Sentinel Arms Customs - Specializing In Unique, One of a kind guns
DarkAngel is offline   Reply With Quote
Old August 6th, 2008, 10:46   #7
surebet
Vicious MSPaint Wizard
 
surebet's Avatar
 
Join Date: Aug 2004
Location: Longueuil, Quebec
What would happen if you simply slap on a G17 slide, remove the fire selector and just loctite the gear to semi?

Guessing the slide doesn't have the same interior geography though, 'cause it would be too easy!
__________________
Annoyingly good with numbers

Stop American Censorship
surebet is offline   Reply With Quote
Old August 6th, 2008, 11:47   #8
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
I'd say that by the time you sank the money into the internals, a new slide, etc, you'd be in for almost the same price as a Glock 17. In your case, I would just buy a KSC G17 so that you can still use any existing mags that you have. Would be cheaper, and less chance of anything going wrong. And then you also have 2 pistols instead!
__________________
Crunchmeister is offline   Reply With Quote
Old August 6th, 2008, 12:58   #9
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
Quote:
Originally Posted by surebet View Post
What would happen if you simply slap on a G17 slide, remove the fire selector and just loctite the gear to semi?

Guessing the slide doesn't have the same interior geography though, 'cause it would be too easy!
Won't work - the G18C and G17 have different hammer/sear assemblies (both located in the lower receiver.)
ILLusion is offline   Reply With Quote
Old August 6th, 2008, 13:07   #10
DarkAngel
* Age Verifier status suspended *
 
DarkAngel's Avatar
 
Join Date: Jun 2006
Location: Scarborough
Send a message via MSN to DarkAngel
Quote:
Originally Posted by ILLusion View Post
Won't work - the G18C and G17 have different hammer/sear assemblies (both located in the lower receiver.)
Yea, if you look at the 18c hammer assembly, it has 2 movable "arms" which is directly related to the method the hammer is fired. if you look at the 17, it still has both "arms" but they are actually one peice instead of being seperated in half. Hard to explain, ull know what im talking about when you see it. Also the hammer is different shape.

I havent done the math yet, but it may be cheaper to replace internals, that and seeing how since legros isnt back from his vacation, not many people have them in canada. But im sure the parts will be less than 250-300$, which is how much i think legros was selling em for, tho i could be wrong as i havent seen his prices in months.
__________________

Certified Sniper Clinic Instructor and Counter Sniper
Sentinel Arms Customs - Specializing In Unique, One of a kind guns
DarkAngel is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 02:30.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.