Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Bore up sets a waste of time ?

:

Upgrades & Modifications

Reply
 
Thread Tools
Old March 11th, 2008, 04:05   #1
K-D0G
 
K-D0G's Avatar
 
Join Date: May 2006
Location: B.C
Bore up sets a waste of time ?

I was thinking about installing a systema bore up set for better accuracy and velocity but have read that they will only work properly with at the very least a m 130 spring. I think its safe to say that the FPS would be much to high. Has anyone had success with a bore up set and a ms 120 spring or is it just a waste of time ? Thanks

Last edited by K-D0G; March 11th, 2008 at 04:10..
K-D0G is offline   Reply With Quote
Old March 11th, 2008, 04:14   #2
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
The spring doesn't need to be as high as an M130.

Minimum is a Systema M120 or equivalent, so a Prometheus MS120SP is sufficient. That is information that I have acquired directly from Systema.

I've effectively run a bore up set in an Armalite with 6.03mm tightbore 590mm length inner barrel and Systema M120S spring. That setup was shooting ~425fps.

Last edited by ILLusion; March 11th, 2008 at 04:17..
ILLusion is offline   Reply With Quote
Old March 11th, 2008, 04:56   #3
K-D0G
 
K-D0G's Avatar
 
Join Date: May 2006
Location: B.C
Excellent !! Thanks so much
K-D0G is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 22:33.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.