|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 24th, 2008, 23:28 | #1 |
aka "Rhonda", "Gaius"
|
VFC FN SCAR Question
I recently got a VFC FN SCAR from A&A and love it.
It came with a shorter inner barrel so that I can use it for CQC. I got as far as having the hop up chamber out along with the mechbox and so forth. My question is: How can I remove the STD inner barrel and switch it with the CQC one? NOTE: I will post pics to show you exactly what I mean either tomorrow or the day after. |
January 25th, 2008, 00:06 | #2 |
Prancercise Guru
|
Go here for a review including photo's of the barrel swap
http://www.arniesairsoft.co.uk/revie.../cat/16/page/1 So once you spin the grub screws loose the inner barrel and hopup slide out. You need to pop the C-clip off the bottom of the hopup and then slide it off the barrel. The hopup rubber will probably stick on the barrel so slide it off an give it some silicon oil so it goes back together without drama. Snap the C-clip on etc. assemble in reverse. |
January 25th, 2008, 00:09 | #3 |
aka "Rhonda", "Gaius"
|
Thanks Danke
|
January 25th, 2008, 11:52 | #4 |
aka "Rhonda", "Gaius"
|
Does anyone else besides me have a VFC SCAR L? If you do what were you shooting at right out of the box?
|
January 25th, 2008, 12:59 | #5 |
I'm receiving mine this Tuesday as well as an AAC flash hider, 10 KA DE mags and some batteries.
My question is, can we buy a VFC SCAR hopup unit?? I'm thinking of buying another hopup unit, attaching it to the CQC barrel and therefore it would be quite easy to switch in between STD and CQC; I would only need to remove the full inner barrel assembly and replace it with the other instead of messing up with the hopup rubber each and every time.
__________________
WE AIN'T DEAD |
|
January 25th, 2008, 13:59 | #6 |
Prancercise Guru
|
I'd love another hopup assembly since I haven't swapped barrels since I tried the first time. Something will go wrong, if I swap between the long and short for sure.
|
January 25th, 2008, 14:06 | #7 | |
Quote:
I chrono'd mine at 325 - 330 fps with .20 Metal Tech. I did a second test with .20 KSC Perfect bb's... chrono'd at 345-355 fps...
__________________
Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS! Last edited by KEVORKIAN; January 25th, 2008 at 15:40.. |
||
January 25th, 2008, 16:00 | #8 |
Thanks Kev, I was wondering as well.
__________________
WE AIN'T DEAD |
|
January 25th, 2008, 22:07 | #9 |
aka "Rhonda", "Gaius"
|
Anyone tried getting it chronied with XT's bb's?
|
January 25th, 2008, 23:10 | #10 |
XT uses Airsoft Elites...correct? Shoot !! All I have is .25's in AE.
__________________
Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS! |
|
January 25th, 2008, 23:42 | #11 |
aka "Rhonda", "Gaius"
|
i wouldn't know, i'm askin this due to that i got it chronied the day i got it and it just came from outside and did about 320 which is low for VFC. might have to break it it and also have it warmed up b4 using
|
March 13th, 2008, 23:05 | #12 |
aka "Rhonda", "Gaius"
|
it shoots under 320fps
|
March 14th, 2008, 00:11 | #13 |
mine is shooting 300 w .20
|
|
March 14th, 2008, 00:50 | #14 |
aka "Rhonda", "Gaius"
|
|
March 14th, 2008, 00:54 | #15 |
Why upgrade it past XT limits? I don't think I've seen you at a single outdoor game... ever..
|
|
|
Bookmarks |
|
|