tm hi-cappa loading nozzle

the_spork_of_death · January 6th, 2008, 02:17

any one know were i can find internals for a hi-cappa loading nozzle, WE or TM

Daiviet · January 6th, 2008, 02:25

you should be able to buy them directly from the retailers, like redwolf or WGC, shouldn't cost too much.

KEVORKIAN · January 6th, 2008, 02:39

What "exactly" do you need?
What exactly do you want?
Maybe I can help!
Drop me a PM...

KP

The Saint · January 6th, 2008, 13:02

http://www.airsoftparts.ca/store2/in...roducts_id=706

RacingManiac · January 6th, 2008, 15:06

I find if you need to replace your TM loading nozzle(usually because of it cracked) you might as well upgrade it to a better one.....SD sells a set with all the bits inside, though you want to keep your original floating valve and use in the SD nozzle or you gonna have all blow-back and no BB out the barrel....

the_spork_of_death · January 6th, 2008, 15:34

i replaced the loading nozzle, was all exited to have my wicked pistol back in action and forgot to switch the guts out from the old nozzle, by the time i realized why it was spewing gas every were and not reloading it was to late and the trash was taken out along with the guts i needed. silly little clip, small screw, piston (for lack of a better word)

ILLusion · January 6th, 2008, 23:51

Contact JAFA for the stock Tokyo Marui components, otherwise you can get aftermarket replacements for all the other parts (spring, floating valve & valve blocker).

The hardest thing to find is the screw.

RacingManiac · January 7th, 2008, 00:08

like everything airsoft really....Brafastco is useless as the sizes in these guns are too small...

Shinjin_MC · January 7th, 2008, 02:18

Quote:

Originally Posted by ILLusion

Contact JAFA for the stock Tokyo Marui components, otherwise you can get aftermarket replacements for all the other parts (spring, floating valve & valve blocker).

The hardest thing to find is the screw.

if you go down to the optometrist and ask for a few eyeglasses screws they fit just fine
Im using one of those in one of my hicapas

the_spork_of_death · January 8th, 2008, 20:54

who or what is jafa?

Scooby Steve · January 8th, 2008, 21:17

JAFA is a member who can get us OEM replacement parts.

T_A_N_K · January 8th, 2008, 23:46

LOL I did the exact same thing. Mine snapped in half and i whipped it across the room losing all the guts. I got JAFA to get mine, However, I seem have to have misplaced them again.... lol

The Saint · January 9th, 2008, 00:00

leonardinjapan(at)hotmail(dot)com

The parts in question are:
H51-19 (screw)
H51-21 (floating valve spring)
H51-22 (floating valve)
H51-23 (floating valve bracket)

the_spork_of_death · January 17th, 2008, 03:54

thanks guys, that helped a lot

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 6th, 2008, 02:17	#1
the_spork_of_death Trader rating Join Date: Apr 2006 Location: prince george	tm hi-cappa loading nozzle any one know were i can find internals for a hi-cappa loading nozzle, WE or TM __________________ this is my rifle, there are many like it but this one is mine. with out me my rifle is nothing, with out my rifle i am nothing.

January 6th, 2008, 02:39	#3
KEVORKIAN Trader rating Join Date: Nov 2006 Location: Manitoba	What "exactly" do you need? What exactly do you want? Maybe I can help! Drop me a PM... KP __________________ Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS! Last edited by KEVORKIAN; January 6th, 2008 at 02:44..

January 6th, 2008, 13:02	#4
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	http://www.airsoftparts.ca/store2/in...roducts_id=706 __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

January 6th, 2008, 02:25	#2
Daiviet Captain Sunshine Trader rating Join Date: Aug 2006	you should be able to buy them directly from the retailers, like redwolf or WGC, shouldn't cost too much.

January 6th, 2008, 15:06	#5
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	I find if you need to replace your TM loading nozzle(usually because of it cracked) you might as well upgrade it to a better one.....SD sells a set with all the bits inside, though you want to keep your original floating valve and use in the SD nozzle or you gonna have all blow-back and no BB out the barrel.... __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

January 6th, 2008, 15:34	#6
the_spork_of_death Trader rating Join Date: Apr 2006 Location: prince george	i replaced the loading nozzle, was all exited to have my wicked pistol back in action and forgot to switch the guts out from the old nozzle, by the time i realized why it was spewing gas every were and not reloading it was to late and the trash was taken out along with the guts i needed. silly little clip, small screw, piston (for lack of a better word) __________________ this is my rifle, there are many like it but this one is mine. with out me my rifle is nothing, with out my rifle i am nothing.

January 6th, 2008, 23:51	#7
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Contact JAFA for the stock Tokyo Marui components, otherwise you can get aftermarket replacements for all the other parts (spring, floating valve & valve blocker). The hardest thing to find is the screw. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

January 7th, 2008, 00:08	#8
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	like everything airsoft really....Brafastco is useless as the sizes in these guns are too small... __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

January 8th, 2008, 20:54	#10
the_spork_of_death Trader rating Join Date: Apr 2006 Location: prince george	who or what is jafa? __________________ this is my rifle, there are many like it but this one is mine. with out me my rifle is nothing, with out my rifle i am nothing.

January 8th, 2008, 21:17	#11
Scooby Steve Trader rating Join Date: Mar 2007 Location: St. Catharines, ON	JAFA is a member who can get us OEM replacement parts.

January 8th, 2008, 23:46	#12
T_A_N_K Trader rating Join Date: Sep 2006	LOL I did the exact same thing. Mine snapped in half and i whipped it across the room losing all the guts. I got JAFA to get mine, However, I seem have to have misplaced them again.... lol

January 9th, 2008, 00:00	#13
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	leonardinjapan(at)hotmail(dot)com The parts in question are: H51-19 (screw) H51-21 (floating valve spring) H51-22 (floating valve) H51-23 (floating valve bracket) __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

January 17th, 2008, 03:54	#14
the_spork_of_death Trader rating Join Date: Apr 2006 Location: prince george	thanks guys, that helped a lot __________________ this is my rifle, there are many like it but this one is mine. with out me my rifle is nothing, with out my rifle i am nothing.

tm hi-cappa loading nozzle

Upgrades & Modifications