|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 12th, 2007, 19:19
|
#1 |
|
G&P M160 motor experinces
I'm not sure if this belongs here or in the Doctors corner, bus as I intend to upgrade I have put it here.
The thing is that I need to change the motor of a few guns and have come across the G&P M160 motor. Like the Systema Magnum motor, this one has neodymium magnets. From what I have heard already, it performs like the Systema Magnum when tested on a short stroked gun putting out 128mps at V0. However i have not heard of anyone who has used it for a longer period, or just for a few thousand rounds. So I'm interested in hearing any experiences with this specific motor, as I can save around 30US$/motor compared to the Systema Magnum by choosing the G&P. So we all know that I'm talking about, this is the one (click me) I have already posted this question on other forums but I have received little or no replies. So if there are any one here at airsoftcanada that has any information to share, please do reply.
__________________
   
|
|
|
|
November 23rd, 2007, 21:22
|
#2 |
|
From what i have heard is more power than magnum. That is hearsay. I dont have any firsthand experience tho. I am in the same boat as you, trying to figure out what one to get.
|
|
|
|
|
November 23rd, 2007, 22:04
|
#3 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
G&P is supposed to be stronger, not necessarily more efficient, certainly cost effective though!
|
|
|
|
|
November 23rd, 2007, 22:18
|
#4 |
|
I was trying to decide on this one or the Guarder motor myself. Guarder is cheaper than the G&P but heard few bad cases on it.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
