custom g36c gearbox

WI-FI · July 22nd, 2007, 15:13

Hi i want to build myself a entire new g36c gearbox i want it to shoot 400 fps so i would like to know what are your suggestion i found that hurricane and king arms are doing shell for the g36 which one do you recommend me? For the internal i have found that guarder are doing a full tune up kit are they good? do you have any other suggestion for the internal?
Thanks

http://www.wgcshop.com/pcart/shopper...GB-03_srch_g36
http://www.wgcshop.com/pcart/shopper...3_cat_Gearboxs
http://www.wgcshop.com/pcart/shopper...ts%20for%20AEG

Spa · July 22nd, 2007, 16:20

the parts look pretty good:P espically the double o ring cylidner head. Any AEG should not go without one of those it helps airseal by 10 fold.

but for thegearboxes, not my field....i noticed that I purchased a CAG36C that was old and had the 2nd gearbox type of metal, and my friends who actually purchased a newer G36C had the 1st gearbox you listed that was darker...Since only AEG's can get better over the years i would assume the darker metal gearbox would be better.

ThunderCactus · July 22nd, 2007, 20:26

systema full tune up kit, guarder gears are bad, hurricane 7mm V3 reinforced gearbox, guarder makes good shells too i've seen.

WI-FI · July 22nd, 2007, 20:48

i have check for systema too but i didn't find any full tune up kit made for the g36 do you know if the kit for the g3 can work? and i have look everywhere and i dont seem to find some of the piece (trigger mecanism, the little plastic piece that cover the gear just behind the trigger and the plastic pin that hold the wire on the side of the gearbox) so i think i maybe better to just buy a new g36 gearbox and upgrade it what do you think?
Thanks

Spa · July 22nd, 2007, 21:03

is your G36c right now a TM or a CA? and does it still have a gearbox in it?

ThunderCactus · July 22nd, 2007, 21:06

must use V3 parts, you can buy a systema FTK for any V3 and just use your old cylinder and air nozzle, or you can buy the guarder FTK and buy systema torque up gears

WI-FI · July 22nd, 2007, 21:11

ok thanks. The gun is a tm but i don't have the gearbox.

WI-FI · July 23rd, 2007, 18:24

somebody know if the trigger unit of the g36 is special or if i can use a unit made for m16?
thanks

ILLusion · July 23rd, 2007, 20:08

It uses a v3 trigger mechanism. An M16 one will not work.

You'll also need to find the safety cover block.

Honestly, you're better off getting a stock gearbox and just upgrading it.

WI-FI · July 23rd, 2007, 20:10

ok do you happen to know were i can find those i have check the only store keeping them is wgc but they are out of stock and don't know when they gonna receive more.
Thanks

ILLusion · July 23rd, 2007, 20:22

I don't. That's why I recommend to start with a stock gearbox.

WI-FI · July 23rd, 2007, 20:24

sorry i mean the stock gearbox :P

ILLusion · July 23rd, 2007, 21:46

From a stock G36C? :P

As far as I know, that's the only way you'll get one with all the associated parts...

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 22nd, 2007, 15:13	#1
WI-FI Trader rating Join Date: Jul 2006 Location: Laval	custom g36c gearbox Hi i want to build myself a entire new g36c gearbox i want it to shoot 400 fps so i would like to know what are your suggestion i found that hurricane and king arms are doing shell for the g36 which one do you recommend me? For the internal i have found that guarder are doing a full tune up kit are they good? do you have any other suggestion for the internal? Thanks http://www.wgcshop.com/pcart/shopper...GB-03_srch_g36 http://www.wgcshop.com/pcart/shopper...3_cat_Gearboxs http://www.wgcshop.com/pcart/shopper...ts%20for%20AEG

July 23rd, 2007, 20:08	#9
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	It uses a v3 trigger mechanism. An M16 one will not work. You'll also need to find the safety cover block. Honestly, you're better off getting a stock gearbox and just upgrading it. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

July 23rd, 2007, 20:10	#10
WI-FI Trader rating Join Date: Jul 2006 Location: Laval	ok do you happen to know were i can find those i have check the only store keeping them is wgc but they are out of stock and don't know when they gonna receive more. Thanks Last edited by WI-FI; July 23rd, 2007 at 20:17..

July 22nd, 2007, 16:20	#2
Spa Trader rating Join Date: Oct 2006 Location: Winnipeg, Manitoba	the parts look pretty good:P espically the double o ring cylidner head. Any AEG should not go without one of those it helps airseal by 10 fold. but for thegearboxes, not my field....i noticed that I purchased a CAG36C that was old and had the 2nd gearbox type of metal, and my friends who actually purchased a newer G36C had the 1st gearbox you listed that was darker...Since only AEG's can get better over the years i would assume the darker metal gearbox would be better.

July 22nd, 2007, 20:26	#3
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	systema full tune up kit, guarder gears are bad, hurricane 7mm V3 reinforced gearbox, guarder makes good shells too i've seen.

July 22nd, 2007, 20:48	#4
WI-FI Trader rating Join Date: Jul 2006 Location: Laval	i have check for systema too but i didn't find any full tune up kit made for the g36 do you know if the kit for the g3 can work? and i have look everywhere and i dont seem to find some of the piece (trigger mecanism, the little plastic piece that cover the gear just behind the trigger and the plastic pin that hold the wire on the side of the gearbox) so i think i maybe better to just buy a new g36 gearbox and upgrade it what do you think? Thanks

July 22nd, 2007, 21:03	#5
Spa Trader rating Join Date: Oct 2006 Location: Winnipeg, Manitoba	is your G36c right now a TM or a CA? and does it still have a gearbox in it?

July 22nd, 2007, 21:06	#6
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	must use V3 parts, you can buy a systema FTK for any V3 and just use your old cylinder and air nozzle, or you can buy the guarder FTK and buy systema torque up gears

July 22nd, 2007, 21:11	#7
WI-FI Trader rating Join Date: Jul 2006 Location: Laval	ok thanks. The gun is a tm but i don't have the gearbox.

July 23rd, 2007, 18:24	#8
WI-FI Trader rating Join Date: Jul 2006 Location: Laval	somebody know if the trigger unit of the g36 is special or if i can use a unit made for m16? thanks

July 23rd, 2007, 20:22	#11
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	I don't. That's why I recommend to start with a stock gearbox. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

July 23rd, 2007, 20:24	#12
WI-FI Trader rating Join Date: Jul 2006 Location: Laval	sorry i mean the stock gearbox :P

July 23rd, 2007, 21:46	#13
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	From a stock G36C? :P As far as I know, that's the only way you'll get one with all the associated parts... __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

custom g36c gearbox

Upgrades & Modifications