need help with kjw m700 bolt removal+low fps

gott_los · February 8th, 2007, 00:28

my gun is shooting at a low fps from what ive been told its either the spring for the hammer or somethings with some valves or something inside
anyways ive been trying to get the bolt off by pressing the black thing in front of the trigger i can feel something moving around tho the bolt wont come out.....
also the trigger is a wiggling around a bunch

thephenom · February 8th, 2007, 01:08

http://airsoftcanada.com/showpost.ph...1&postcount=18

Shyamalan · March 23rd, 2007, 05:18

Hello , I am from Hungary and I wish somebody can help me.

About 2 weeks ago I ordered a kj works m700 take down gas sniper from
uncompany Hong-Kong.

But this gun is VERY VERY weak. With green gas shoots about 350fps....
People said the I must remove the gas regulator. This is a orange thingy inside gas entering hole, it is the gas regulator that KJ intentionally inserted into it to reduce the air flow, so as to reduce its fire power.

But this orange thingy IS NOT IN MY GUN so I can't pull it out...

Please help somebody.
Thank you very much.

yanhchan · March 23rd, 2007, 10:35

Quote:

Originally Posted by Shyamalan

Hello , I am from Hungary and I wish somebody can help me.

About 2 weeks ago I ordered a kj works m700 take down gas sniper from
uncompany Hong-Kong.

But this gun is VERY VERY weak. With green gas shoots about 350fps....
People said the I must remove the gas regulator. This is a orange thingy inside gas entering hole, it is the gas regulator that KJ intentionally inserted into it to reduce the air flow, so as to reduce its fire power.

But this orange thingy IS NOT IN MY GUN so I can't pull it out...

Please help somebody.
Thank you very much.

Whats the tempertature in Hungary right now? It could be due to the cold.

Dracheous · March 23rd, 2007, 10:53

Generally speaking, "regulators" are not installe into air-rifle/pistols unless required by law.

In the M700 there should be a "screw"/"Bolt" to loosen/tighten to increase/decrease the amount of gas getting out the mag per shot.

But Hungary has long winters does it now? Propane or any gas will become very weak to the point it almost dost not work at all at lower tempuratures.

CDN_Stalker · March 23rd, 2007, 10:58

Actually Drach, the takedown model does come with a little barrel shaped peice of rubber that blocks part of the gas flow installed in the nozzle of the bolt. Just requires needlenosed pliers to pull it out.

As far as the problems of low fps listed here, I'm not sure why (temp has been mentioned, could very well be) but I feel like I'd need more info about what has been done/not done with the guns, the environment, method of gas fill, etc.

HaZarD SFD · March 23rd, 2007, 11:08

LOL I Knew stalker would post on this one lol!

CDN_Stalker · March 23rd, 2007, 11:10

I was staying away until I got more info. Then I saw I had to make a correction.

http://www.wgcshop.com/WGC_Shop/revi...0td_review.htm

Shyamalan · March 23rd, 2007, 12:25

I don't think that the temperature is the problem ,because I shoot from my room outside. In my room about 22 C . This gun is a bullshit!! I use with ultrair power gas , and with the cybergun red gas . The power is the same each gas type. I do not know why. What could I do with this gun? I read everybody shoots 600-800 fps....... I shoot 300-350fps.........

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 8th, 2007, 00:28	#1
gott_los Trader rating Join Date: Feb 2007	need help with kjw m700 bolt removal+low fps my gun is shooting at a low fps from what ive been told its either the spring for the hammer or somethings with some valves or something inside anyways ive been trying to get the bolt off by pressing the black thing in front of the trigger i can feel something moving around tho the bolt wont come out..... also the trigger is a wiggling around a bunch

March 23rd, 2007, 05:18	#3
Shyamalan Trader rating Join Date: Mar 2007	m700 take down problem Hello , I am from Hungary and I wish somebody can help me. About 2 weeks ago I ordered a kj works m700 take down gas sniper from uncompany Hong-Kong. But this gun is VERY VERY weak. With green gas shoots about 350fps.... People said the I must remove the gas regulator. This is a orange thingy inside gas entering hole, it is the gas regulator that KJ intentionally inserted into it to reduce the air flow, so as to reduce its fire power. But this orange thingy IS NOT IN MY GUN so I can't pull it out... Please help somebody. Thank you very much.

March 23rd, 2007, 10:53	#5
Dracheous Lego Head Trader rating Join Date: Nov 2005 Location: Gatineau, that's right I'm in QUEBEC!	Generally speaking, "regulators" are not installe into air-rifle/pistols unless required by law. In the M700 there should be a "screw"/"Bolt" to loosen/tighten to increase/decrease the amount of gas getting out the mag per shot. But Hungary has long winters does it now? Propane or any gas will become very weak to the point it almost dost not work at all at lower tempuratures. __________________ _________________________________ "The hydrogen economy car from the people who brought you the 'Hindenburg'" - Glen Foster Condoms do not guarantee safe sex any more. A friend of mine wore one and was shot by the woman's husband!

February 8th, 2007, 01:08	#2
thephenom Trader rating Join Date: Jan 2006 Location: Toronto	http://airsoftcanada.com/showpost.ph...1&postcount=18

March 23rd, 2007, 10:58	#6
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Actually Drach, the takedown model does come with a little barrel shaped peice of rubber that blocks part of the gas flow installed in the nozzle of the bolt. Just requires needlenosed pliers to pull it out. As far as the problems of low fps listed here, I'm not sure why (temp has been mentioned, could very well be) but I feel like I'd need more info about what has been done/not done with the guns, the environment, method of gas fill, etc. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 23rd, 2007, 11:08	#7
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	LOL I Knew stalker would post on this one lol! __________________ No Comment.

March 23rd, 2007, 11:10	#8
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	I was staying away until I got more info. Then I saw I had to make a correction. http://www.wgcshop.com/WGC_Shop/revi...0td_review.htm __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 23rd, 2007, 12:25	#9
Shyamalan Trader rating Join Date: Mar 2007	m700 take down I don't think that the temperature is the problem ,because I shoot from my room outside. In my room about 22 C . This gun is a bullshit!! I use with ultrair power gas , and with the cybergun red gas . The power is the same each gas type. I do not know why. What could I do with this gun? I read everybody shoots 600-800 fps....... I shoot 300-350fps.........

need help with kjw m700 bolt removal+low fps

Doctor's Corner