JT goggles?!

Spitfire · July 2nd, 2006, 14:40

hi
i have seen several guys wearing JT goggles...
but without those silly pbfaceshield...

did you buy the whole facegoggle or what?

thanks

yanhchan · July 2nd, 2006, 14:44

You usually have to buy the whole shebang and you just throw away the shield LOL.

^Hyperion^ · July 2nd, 2006, 15:14

yeah , that's what I did and it does a good job

The Saint · July 2nd, 2006, 15:15

Not all models of goggles allow for the removal of the mask portion, so be sure to check before you buy.

skewed · July 2nd, 2006, 15:26

The Proteus goggles might not be the best choice if you plan on ditching the mask. That's what I've had for a year or two now, but when I went to remove them, I discovered that the strap is attached to the mask, not the goggles themselves. Therefore, it's too short to attach to the goggles once you get it all apart.

Spitfire · July 2nd, 2006, 16:02

link to one of the possibles? if possible at wgc or redwolf...
thanks

Cervantes · July 2nd, 2006, 16:51

I picked up THESE and just took a hacksaw to cut a slit in the back, so I can remove the goggles. This way they retain the ability to work with the mask should the need arise. Its a simple mod, but I can take a picture if you want.

Spitfire · July 3rd, 2006, 06:01

hi link doesnt work...

yanhchan · July 3rd, 2006, 07:15

Quote:

Originally Posted by Spitfire

hi link doesnt work...

LOL it asks you for a postal code, but you're in switzerland...

Spitfire · July 3rd, 2006, 07:30

jap... i took the one given as example... but it didnt work...

Cervantes · July 3rd, 2006, 20:46

Well, heres what I bought at CT

this is what I ended up with. The plastic they use to make the mask is flexable, so it didn't make a very pretty cut... but I dont really care if its raggy or not. I doubt it would tear up the headband.

yanhchan · July 3rd, 2006, 20:49

Quote:

Originally Posted by Cervantes

Well, heres what I bought at CT

I have similar ones (just the goggles) but my lense are tinted, it fogs up easily so I suggest either a fan or cut up the top a bit for better ventiliation.

Cervantes · July 3rd, 2006, 20:58

The ones I have are thermal, and they didnt fog up when I wore them last, despite all the sweat that was dripping off my face.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 2nd, 2006, 14:40	#1
Spitfire Trader rating Join Date: Dec 2005 Location: Switzerland	JT goggles?! hi i have seen several guys wearing JT goggles... but without those silly pbfaceshield... did you buy the whole facegoggle or what? thanks

July 2nd, 2006, 14:44	#2
yanhchan Trader rating Join Date: Jun 2005 Location: Scarborough/Richmond Hill ON	You usually have to buy the whole shebang and you just throw away the shield LOL. __________________ YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy

July 2nd, 2006, 15:14	#3
^Hyperion^ Trader rating Join Date: Jan 2006 Location: Montreal , Quebec	yeah , that's what I did and it does a good job __________________

July 2nd, 2006, 15:15	#4
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Not all models of goggles allow for the removal of the mask portion, so be sure to check before you buy. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

July 2nd, 2006, 15:26	#5
skewed Trader rating Join Date: Mar 2005 Location: Downtown Toronto	The Proteus goggles might not be the best choice if you plan on ditching the mask. That's what I've had for a year or two now, but when I went to remove them, I discovered that the strap is attached to the mask, not the goggles themselves. Therefore, it's too short to attach to the goggles once you get it all apart.

July 2nd, 2006, 16:02	#6
Spitfire Trader rating Join Date: Dec 2005 Location: Switzerland	link to one of the possibles? if possible at wgc or redwolf... thanks

July 2nd, 2006, 16:51	#7
Cervantes Trader rating Join Date: Dec 2004 Location: Oakville, Ontario	I picked up THESE and just took a hacksaw to cut a slit in the back, so I can remove the goggles. This way they retain the ability to work with the mask should the need arise. Its a simple mod, but I can take a picture if you want.

July 3rd, 2006, 06:01	#8
Spitfire Trader rating Join Date: Dec 2005 Location: Switzerland	hi link doesnt work...

July 3rd, 2006, 07:30	#10
Spitfire Trader rating Join Date: Dec 2005 Location: Switzerland	jap... i took the one given as example... but it didnt work...

July 3rd, 2006, 20:46	#11
Cervantes Trader rating Join Date: Dec 2004 Location: Oakville, Ontario	Well, heres what I bought at CT this is what I ended up with. The plastic they use to make the mask is flexable, so it didn't make a very pretty cut... but I dont really care if its raggy or not. I doubt it would tear up the headband.

July 3rd, 2006, 20:58	#13
Cervantes Trader rating Join Date: Dec 2004 Location: Oakville, Ontario	The ones I have are thermal, and they didnt fog up when I wore them last, despite all the sweat that was dripping off my face.

JT goggles?!

Gear Discussion