P226 no longer fires.

downtown-one · June 21st, 2006, 08:30

After going through a clip, i have found that my KJW p226 no longer fires. After careful inspection I had found that the little notch that hits the valve release on the magazine has broken off. In other words its the little peice that hits the magazine to allow gas to pass through. Is there any way of replacing this piece? hopefully Any upgraded/TM parts?

Jugglez · June 21st, 2006, 09:21

You're looking for part P226-32 in the Marui manual. It may not fit the KJ P226 as the gun is not a 100% exact copy of Marui's.

Good luck finding that piece too :tup:

Ilya_7 · June 21st, 2006, 10:39

does it blow back but not return to the original slide position? my KJW P226 had that problem and in the KJW parts it's # 12 but the upgrade part that jugglez is talking about replaced mine as an exact match. if it's that problem then this may be the part

downtown-one · June 21st, 2006, 11:56

Jugglez nailed the right part. Anyone have any ideas as to where I can obtain this part?

r2ditu · June 22nd, 2006, 07:00

hello sir downtown -one

i have same problem i think that's item # 30 in our kjw P226 diagram it is the valve knocker , and i also followed ur thread entitled P226 double feeding= loading nozzle shredding, that's why i also replaced the recoil and loading muzzle to guarder,,,, and it also broke my valve knocker, and it seems i cant find a replacement, i went to a gunsmith, he told me he know's a guy who can fabricate a valve knocker made in steel,hopefully it works

Gryphon · June 22nd, 2006, 10:54

downtown-one this is uptown-one, got a player returning via the upper path...

Sorry, nothing to contribute to the thread but saw the name and was glad to see another fan of that awesome flick!

downtown-one · June 23rd, 2006, 03:25

r2ditu, sounds like an idea. Let me know if it works out fine - if it does you think you can help me out too? I'd be willing to pay for it.

Isotope · July 8th, 2006, 13:44

They carry P226-32 at Redwolf. Look under Parts-->TM GBB---> and there it is. I had to replace mine because the spring post broke after I upgraded the hammer spring (Guarder 150%, I don't recommend it). Hope that helps.

bugmenomo · June 19th, 2007, 19:58

The Same thing happened to me, the knocker just suddenly broke on me. I've tried to take apart the rear chassis assembly but can't seem to get it out. Can anybody help me out here?

xopheak · December 1st, 2007, 18:02

Hi, I'm sorry for answering to this thread like this, but I really need help.

I'm not capable to re-assemble the valve knocker that I bought.

I only correctly (I think) have reassembled this parts.

How to re-assemble the whole ?

Thank you!!!

Renegade) · December 1st, 2007, 18:50

Is this a TM? From that angle im not sure at all, but there is only one correct place for all the parts, fun is following the guide and reasembling one at a time.. Just go slow untill you get it.

xopheak · December 1st, 2007, 18:58

Thank for your answer, Renegade.

OK, first thing it isn't a TM but a KJ WORKS, but I checked both manuals and there were 100% similar.

In fact, I was looking for a solution since 1 month now. I never succeed and the result's: I can't re-assemble this alone.

The problem's that I can't understand the manual. It's looking very strange to me.

(click to zoom in)

For example, the spring 31. How it can be here? 8O

And by the way, Sorry for my bad english.

Renegade) · December 1st, 2007, 19:56

Spring 31 keeps the tention on the valve knocker, meaning it holds it down but allows it to move up and down.

xopheak · December 1st, 2007, 20:18

Quote:

Originally Posted by Renegade)

Spring 31 keeps the tention on the valve knocker, meaning it holds it down but allows it to move up and down.

OK thanks for the info!!! But sorry I don't know how to place it in the valve knocker. Can you draw on the image where i should put this spring?

Thanks !!!

Renegade) · December 1st, 2007, 20:42

Well you see how it is shown to the left in the diagram? Thats how it goes on, just line it up, I think the bar of the spring goes on a small nich on top or just sits on top of the knocker, then the spring hole goes around the shaft obviously and put it back in the hammer assembly.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 21st, 2006, 08:30	#1
downtown-one Trader rating Join Date: May 2006 Location: San Diego	P226 no longer fires. After going through a clip, i have found that my KJW p226 no longer fires. After careful inspection I had found that the little notch that hits the valve release on the magazine has broken off. In other words its the little peice that hits the magazine to allow gas to pass through. Is there any way of replacing this piece? hopefully Any upgraded/TM parts?

June 21st, 2006, 09:21	#2
Jugglez Trader rating Join Date: Feb 2005 Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401	You're looking for part P226-32 in the Marui manual. It may not fit the KJ P226 as the gun is not a 100% exact copy of Marui's. Good luck finding that piece too :tup: __________________

June 21st, 2006, 10:39	#3
Ilya_7 Trader rating Join Date: Jan 2006 Location: Thornhill	does it blow back but not return to the original slide position? my KJW P226 had that problem and in the KJW parts it's # 12 but the upgrade part that jugglez is talking about replaced mine as an exact match. if it's that problem then this may be the part __________________ Less QQ, More Pew Pew. My real name is Jon.

June 21st, 2006, 11:56	#4
downtown-one Trader rating Join Date: May 2006 Location: San Diego	Jugglez nailed the right part. Anyone have any ideas as to where I can obtain this part?

June 22nd, 2006, 07:00	#5
r2ditu Trader rating Join Date: Jun 2006 Location: philippines	hello sir downtown -one i have same problem i think that's item # 30 in our kjw P226 diagram it is the valve knocker , and i also followed ur thread entitled P226 double feeding= loading nozzle shredding, that's why i also replaced the recoil and loading muzzle to guarder,,,, and it also broke my valve knocker, and it seems i cant find a replacement, i went to a gunsmith, he told me he know's a guy who can fabricate a valve knocker made in steel,hopefully it works

June 22nd, 2006, 10:54	#6
Gryphon Trader rating Join Date: Mar 2005 Location: MB	downtown-one this is uptown-one, got a player returning via the upper path... Sorry, nothing to contribute to the thread but saw the name and was glad to see another fan of that awesome flick!

June 23rd, 2006, 03:25	#7
downtown-one Trader rating Join Date: May 2006 Location: San Diego	r2ditu, sounds like an idea. Let me know if it works out fine - if it does you think you can help me out too? I'd be willing to pay for it.

July 8th, 2006, 13:44	#8
Isotope Trader rating Join Date: Jul 2006 Location: Columbia, SC	They carry P226-32 at Redwolf. Look under Parts-->TM GBB---> and there it is. I had to replace mine because the spring post broke after I upgraded the hammer spring (Guarder 150%, I don't recommend it). Hope that helps.

June 19th, 2007, 19:58	#9
bugmenomo Banned Trader rating Join Date: Jun 2007	The Same thing happened to me, the knocker just suddenly broke on me. I've tried to take apart the rear chassis assembly but can't seem to get it out. Can anybody help me out here?

December 1st, 2007, 18:02	#10
xopheak Trader rating Join Date: Dec 2007	I really need help Hi, I'm sorry for answering to this thread like this, but I really need help. I'm not capable to re-assemble the valve knocker that I bought. I only correctly (I think) have reassembled this parts. How to re-assemble the whole ? Thank you!!!

December 1st, 2007, 18:50	#11
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Is this a TM? From that angle im not sure at all, but there is only one correct place for all the parts, fun is following the guide and reasembling one at a time.. Just go slow untill you get it. __________________ W1-5

December 1st, 2007, 18:58	#12
xopheak Trader rating Join Date: Dec 2007	Thank for your answer, Renegade. OK, first thing it isn't a TM but a KJ WORKS, but I checked both manuals and there were 100% similar. In fact, I was looking for a solution since 1 month now. I never succeed and the result's: I can't re-assemble this alone. The problem's that I can't understand the manual. It's looking very strange to me. (click to zoom in) For example, the spring 31. How it can be here? 8O And by the way, Sorry for my bad english.

December 1st, 2007, 19:56	#13
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Spring 31 keeps the tention on the valve knocker, meaning it holds it down but allows it to move up and down. __________________ W1-5

December 1st, 2007, 20:42	#15
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Well you see how it is shown to the left in the diagram? Thats how it goes on, just line it up, I think the bar of the spring goes on a small nich on top or just sits on top of the knocker, then the spring hole goes around the shaft obviously and put it back in the hammer assembly. __________________ W1-5

P226 no longer fires.

Doctor's Corner