kwa g19 need help!

nstyle47 · May 8th, 2006, 16:27

hey i just bought a kwa g19 and its great everything works fine except the slide never locks back after the last shot is fired does anyone have an idea why that may be?

airsoft japan · May 8th, 2006, 16:31

take o look on the magazine

nstyle47 · May 8th, 2006, 16:33

where should i look on the magazine?

airsoft japan · May 8th, 2006, 16:34

check the loader spring

nstyle47 · May 8th, 2006, 16:37

it looks ok although its hard to push the bbs in sometimes and it never really wants to stay locked down when im loading bbs either

airsoft japan · May 8th, 2006, 16:40

remove your mag base and take off the locked down spring

airsoft japan · May 8th, 2006, 16:44

theres a pin to remove
u have to use a radio plier

airsoft japan · May 8th, 2006, 16:47

or check the groove that pushes the slide stopper

nstyle47 · May 8th, 2006, 16:57

ok ill try that some one told me it might be that screw that gets loose in the blowback chamber could that be it too? i dont see how that could be it tho cause the gun shoots fine cycles fine just doesnt stay back when the ammos done

ILLusion · May 8th, 2006, 17:04

What about if you were to manually pull back the slide with an empty magazine inserted? Will the slide lock back then?

CDN_Stalker · May 8th, 2006, 17:05

Happened to my KSC G19 once, the slide release is made of sheet metal and the part that gets pushed up (sticks out horizontally in the magwell) by the mag follower was slightly bent upwards and wouldn't let the slide lock after the last shot.

I took the slide off (learn to do this if you don't already) and used some pliers to bend it down a little bit to cause the part that catches the slide to rise up more. Only needs a slight bit of bending to fix it, don't overdo it!!!!

nstyle47 · May 8th, 2006, 17:43

yea the thing on top of the mag its straight up and down the metal tab thingie on the left side right thats what i should bend a little? or bend the slide catch?

nstyle47 · May 8th, 2006, 17:49

oh ok i see what ur talkin about now im gonna bend it down a little and see if it works thanks

ILLusion · May 8th, 2006, 18:52

If you can rack the slide back manually and have it lock in to place when you have an empty magazine inserted, then there should be nothing wrong with your follower

nstyle47 · May 8th, 2006, 18:55

hey thanks cdn stalker that was it lol that was driving me nutz

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 8th, 2006, 16:27	#1
nstyle47 Trader rating Join Date: May 2006 Location: hartford connecticut united states	kwa g19 need help! hey i just bought a kwa g19 and its great everything works fine except the slide never locks back after the last shot is fired does anyone have an idea why that may be?

May 8th, 2006, 17:04	#10
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	What about if you were to manually pull back the slide with an empty magazine inserted? Will the slide lock back then? __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

May 8th, 2006, 17:05	#11
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Happened to my KSC G19 once, the slide release is made of sheet metal and the part that gets pushed up (sticks out horizontally in the magwell) by the mag follower was slightly bent upwards and wouldn't let the slide lock after the last shot. I took the slide off (learn to do this if you don't already) and used some pliers to bend it down a little bit to cause the part that catches the slide to rise up more. Only needs a slight bit of bending to fix it, don't overdo it!!!! __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

May 8th, 2006, 16:31	#2
airsoft japan Trader rating Join Date: May 2006 Location: Japan	take o look on the magazine

May 8th, 2006, 16:33	#3
nstyle47 Trader rating Join Date: May 2006 Location: hartford connecticut united states	where should i look on the magazine?

May 8th, 2006, 16:34	#4
airsoft japan Trader rating Join Date: May 2006 Location: Japan	check the loader spring

May 8th, 2006, 16:37	#5
nstyle47 Trader rating Join Date: May 2006 Location: hartford connecticut united states	it looks ok although its hard to push the bbs in sometimes and it never really wants to stay locked down when im loading bbs either

May 8th, 2006, 16:40	#6
airsoft japan Trader rating Join Date: May 2006 Location: Japan	remove your mag base and take off the locked down spring

May 8th, 2006, 16:44	#7
airsoft japan Trader rating Join Date: May 2006 Location: Japan	theres a pin to remove u have to use a radio plier

May 8th, 2006, 16:47	#8
airsoft japan Trader rating Join Date: May 2006 Location: Japan	or check the groove that pushes the slide stopper

May 8th, 2006, 16:57	#9
nstyle47 Trader rating Join Date: May 2006 Location: hartford connecticut united states	ok ill try that some one told me it might be that screw that gets loose in the blowback chamber could that be it too? i dont see how that could be it tho cause the gun shoots fine cycles fine just doesnt stay back when the ammos done

May 8th, 2006, 17:43	#12
nstyle47 Trader rating Join Date: May 2006 Location: hartford connecticut united states	yea the thing on top of the mag its straight up and down the metal tab thingie on the left side right thats what i should bend a little? or bend the slide catch?

May 8th, 2006, 17:49	#13
nstyle47 Trader rating Join Date: May 2006 Location: hartford connecticut united states	oh ok i see what ur talkin about now im gonna bend it down a little and see if it works thanks

May 8th, 2006, 18:52	#14
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	If you can rack the slide back manually and have it lock in to place when you have an empty magazine inserted, then there should be nothing wrong with your follower __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

May 8th, 2006, 18:55	#15
nstyle47 Trader rating Join Date: May 2006 Location: hartford connecticut united states	hey thanks cdn stalker that was it lol that was driving me nutz

kwa g19 need help!

Doctor's Corner