G19 mystery part. HELP

MilanWG · December 14th, 2005, 14:05

Hello.

I am trying to help out a friend who has a KSC G19 gbb pistol.
He broke a part of the internals. A little lip broke right off of where the screw driver is pointing, at the tip. What part is this? Can it be replace and if so, where?

Thanks a lot, im trying to get my friend to play more airsoft :tup: [img]

MadMax · December 14th, 2005, 14:09

Looks like you broke off the ejector on the blowback nozzle. It pushes bbs out of the mag and up the loading ramp. You'll have to replace the entire nozzle. Check out wgcshop.com or uncompany.com for parts. Reference the part numbers from the gun diagrams listings in the doc's section here.

MilanWG · December 14th, 2005, 14:16

WGC and UN both don't have diagrams for the KSC G19.

My friend also does not have the manual for the pistol...

Brian McIlmoyle · December 14th, 2005, 14:17

That is the "BB advance ramp" picks up the bb from the top of the magazine, guides it up the feed ramp and into the chamber.

with this part broken, bbs will not be loaded from the magazine to the chamber.

I expect you will need to replace the entire expansion chamber, nozzle assembly as they are molded in one piece.. I think

duplicate... Carl.. too .. fast..

MilanWG · December 14th, 2005, 14:19

Does anyone know where my friend could order the part?

Thanks for the help so far :tup:

MadMax · December 14th, 2005, 14:20

stickied to the top of the Doctors Corner:

http://tech.airsoftcanada.com/

Kwokwai · December 14th, 2005, 15:08

Contact either Tru or ILLusion. I got my replacement part from ILLusion from one of his WGC group orders. It's the same interchangeable part for the G17, G18C, G23C, G19, etc. as far as I know.

ILLusion · December 15th, 2005, 04:48

unfortunately, all of my suppliers are out of stock on that part at this time.

sdkfz234 · December 15th, 2005, 09:50

I remember reading somewhere that someone else who had the same part broke used a small screw of some sort to replace the broken piece. It would simply have to extend out far enough to line up with the hole where the gas exits.

I haven't tried this myself, I think I read it somewhere, but it's worth a try if you've already accepted that the part is beyond any other means of repair.

MilanWG · December 15th, 2005, 13:49

that sounds a little "ify" to me. might even damage the internals with a screw

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 14th, 2005, 14:05	#1
MilanWG Perroz Designs Trader rating Join Date: Jul 2003 Location: Toronto, ON	G19 mystery part. HELP Hello. I am trying to help out a friend who has a KSC G19 gbb pistol. He broke a part of the internals. A little lip broke right off of where the screw driver is pointing, at the tip. What part is this? Can it be replace and if so, where? Thanks a lot, im trying to get my friend to play more airsoft :tup: [img] __________________

December 14th, 2005, 14:09	#2
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	Looks like you broke off the ejector on the blowback nozzle. It pushes bbs out of the mag and up the loading ramp. You'll have to replace the entire nozzle. Check out wgcshop.com or uncompany.com for parts. Reference the part numbers from the gun diagrams listings in the doc's section here. __________________ Want nearly free GBB gas?

December 14th, 2005, 14:16	#3
MilanWG Perroz Designs Trader rating Join Date: Jul 2003 Location: Toronto, ON	WGC and UN both don't have diagrams for the KSC G19. My friend also does not have the manual for the pistol... __________________

December 14th, 2005, 14:17	#4
Brian McIlmoyle 8=======D Trader rating Join Date: Apr 2005 Location: Toronto	That is the "BB advance ramp" picks up the bb from the top of the magazine, guides it up the feed ramp and into the chamber. with this part broken, bbs will not be loaded from the magazine to the chamber. I expect you will need to replace the entire expansion chamber, nozzle assembly as they are molded in one piece.. I think duplicate... Carl.. too .. fast.. __________________ Brian McIlmoyle TTAC3 Director CAPS Range Officer Toronto Downtown Age Verifier OPERATION WOODSMAN If the tongue could cut as the sword does, the dead would be infinite

December 14th, 2005, 14:19	#5
MilanWG Perroz Designs Trader rating Join Date: Jul 2003 Location: Toronto, ON	Does anyone know where my friend could order the part? Thanks for the help so far :tup: __________________

December 14th, 2005, 14:20	#6
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	stickied to the top of the Doctors Corner: http://tech.airsoftcanada.com/ __________________ Want nearly free GBB gas?

December 14th, 2005, 15:08	#7
Kwokwai Trader rating Join Date: Dec 2001 Location: Mississauga, ON	Contact either Tru or ILLusion. I got my replacement part from ILLusion from one of his WGC group orders. It's the same interchangeable part for the G17, G18C, G23C, G19, etc. as far as I know.

December 15th, 2005, 04:48	#8
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	unfortunately, all of my suppliers are out of stock on that part at this time. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

December 15th, 2005, 09:50	#9
sdkfz234 Trader rating Join Date: Jan 2005 Location: Cambridge, ON	I remember reading somewhere that someone else who had the same part broke used a small screw of some sort to replace the broken piece. It would simply have to extend out far enough to line up with the hole where the gas exits. I haven't tried this myself, I think I read it somewhere, but it's worth a try if you've already accepted that the part is beyond any other means of repair.

December 15th, 2005, 13:49	#10
MilanWG Perroz Designs Trader rating Join Date: Jul 2003 Location: Toronto, ON	that sounds a little "ify" to me. might even damage the internals with a screw __________________

G19 mystery part. HELP

Doctor's Corner