R Hop Recommendations?

[Showe22]

I have a VSR 10 G Spec that I want to upgrade. There's a tight bore barrel inside already, and I'm going to throw in a TDC mod next month. I've got a few questions...

Can anyone recommend someone who does R Hop mods around the GTA? I'm in the Durham region and don't want to ship my barrel out for the installation.

Would I need a dangerwerx Hop up arm with a flat prong, or dual prong?

[ThunderCactus]

pestobanana

[daishi]

Originally Posted by ThunderCactus

pestobanana

Pesto(z) would be good. He is currently working on my g-spec. There are some issues due to the way the stock hop is, but he will use the stock plastic arm shave off the prongs and install an m-nub of sorts.

I would also HIGHLY recommend the floss and Teflon tape mod. Got mine shooting 499-501 fps consistently.

I am hoping once it comes back to me all the issues I found are ironed out. I want it firing at 300 feet with no arching and straight with .4's+. I know it is possible, and with the upgrades and such that are in her....anything less is a disappointment.

Was actually thinking about contacting you Thunder, seeing if I could ship it to you once it is done being looked over by Z (if it is still misbehaving that is) to get you to give her a go over, since I hear your vsr is of god like renown.

[ThunderCactus]

more or less
I'm still ironing out issues with my M24. Stupid PDI hop chamber and stupid winter interfering with testing lol

[daishi]

Well thankfully this is a TM VSR Gspec without the horrible pdi hopup....

Really hoping my issues with bb's flying left and right and not being able to get out to 300 feet will be solved once Z is finished with it.... if not.... Ill give you a shout, see if you can see if there are any gremlins in her that are causing problems.