Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

VSR hop upgrades

:

Upgrades & Modifications

Reply
 
Thread Tools
Old July 8th, 2016, 18:27   #1
daishi
 
daishi's Avatar
 
Join Date: Feb 2011
Location: Toronto
Send a message via MSN to daishi
VSR hop upgrades

Hey all,

Just a quick question regarding the vsr-10 gspec hop up.

When it comes to upgrading these parts, should I purchase a PDI v2 hop unit with the w-hold bucking and a PDI 6.01 554mm barrel....

Or would staying with the stock hop unit and getting the pdi w hold bucking with a type b dangerwerx hop arm and an EDGi 6.03 554mm barrel be the better alternative?

I will be running a bore up pdi v trigger/cylinder set.
__________________
Quote:
Originally Posted by Janus View Post
Is he a spambot or is he a francophone? I really can't tell the difference sometimes.
Quote:
Originally Posted by Latvian291 View Post
This is one of the funniest things I've read.
Commandment 1 of LMGesus: Fuck getting kills. That's the job of your teammates, otherwise known as the cannon fodder. Your job is to be scary.
daishi is offline   Reply With Quote
Old July 8th, 2016, 19:01   #2
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
I personally am not a fan of the pdi hop unit. You have to remove the mag to adjust it and the set screws can loosen off damaging the nozzle or at the least just not holding the setting. Perhaps some loctite after you set it but that still isn't verry useful in the field for adjusting on the fly.
I'd go laylax myself but then I don't know how the pdi nozzle will go with the laylax hop up. Altho i know the pdi v2 works with most nozzles.
Also why so long, if you keep the barrel 455 or shorter you won't need to bore up unless you wanna run bb's above a .40g (prety useless around here, not enough safe range)
Edit. The edgi barrels are nice but you can get quality barrels for less and locally. All the normal brands come to mind really. Depends if you wanna drop 60 buck or 150 lol
Using a laylax hop up you can grab any aeg barrel you like.
I personally run 455 mm madbull 6.03 or 6.01 depending what was available. Currently a 6.01.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft

Last edited by Hectic; July 8th, 2016 at 19:06..
Hectic is offline   Reply With Quote
Old July 8th, 2016, 19:02   #3
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
I just kept the stock chamber because it's great. However you should replace the hop arm with a Dangerwerx one.
And yeah why a huge barrel? I upgraded from the GSpecs's short 303mm to a standard VSR length of 430mm, and that's all you should need (and on a GSpec it doesn't go to the end of the supressor, so still provides silencing).
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old July 8th, 2016, 19:13   #4
daishi
 
daishi's Avatar
 
Join Date: Feb 2011
Location: Toronto
Send a message via MSN to daishi
Oh sorry, I meant 503mm, which is to the end of the silencer from EDGi.

Looks like Ill be leaning toward keeping the stock hop unit, putting in the w hold pdi bucking and a Dangerwerx arm (if I can find one).

Is there any significant difference between a 430mm and 503mm in terms of range or anything?

Also according to EDGi..the 503 versus a 430 get an extra ~20 meters....

435mm 6.03 barrel is $80
503mm 6.03 barrel is $85

EdGi claims a 20meter range boost between the two... not sure if that claim is accurate. What would be the difference in shot sound?
__________________
Quote:
Originally Posted by Janus View Post
Is he a spambot or is he a francophone? I really can't tell the difference sometimes.
Quote:
Originally Posted by Latvian291 View Post
This is one of the funniest things I've read.
Commandment 1 of LMGesus: Fuck getting kills. That's the job of your teammates, otherwise known as the cannon fodder. Your job is to be scary.

Last edited by daishi; July 8th, 2016 at 19:33..
daishi is offline   Reply With Quote
Old July 8th, 2016, 19:51   #5
Drakker
Official ASC Geomorphologist
 
Drakker's Avatar
 
Join Date: Sep 2009
Location: Montr?al south shore, Qc
20m extra range is ludicrous. Longer barrels won't give you longer range.

You can get the airsoftpro arm, its great, and cheaper than the dangerwerx:

http://airsoftpro.cz/en/gun-parts-up...-mb02-3-7-9...
__________________
Keep quiet. Sound travels faster than BBs.

Québec province's master age verification representative.
Drakker is offline   Reply With Quote
Old July 8th, 2016, 20:04   #6
daishi
 
daishi's Avatar
 
Join Date: Feb 2011
Location: Toronto
Send a message via MSN to daishi
Alright thanks guys! Think Ill just go with the 435mm then!

Also...Im looking to go with a slightly stronger spring that will work with the stock spring guide. Since i have to buy the pdi w hold from xfire....and they sell springs....

What is the diameter of the stock spring guide? Should I be going with a 1mm, or 13 mm spring?
__________________
Quote:
Originally Posted by Janus View Post
Is he a spambot or is he a francophone? I really can't tell the difference sometimes.
Quote:
Originally Posted by Latvian291 View Post
This is one of the funniest things I've read.
Commandment 1 of LMGesus: Fuck getting kills. That's the job of your teammates, otherwise known as the cannon fodder. Your job is to be scary.
daishi is offline   Reply With Quote
Old July 8th, 2016, 20:09   #7
Drakker
Official ASC Geomorphologist
 
Drakker's Avatar
 
Join Date: Sep 2009
Location: Montr?al south shore, Qc
You will most likely need to change the spring guide to use a stronger spring. The stock plastic guide isn't all that strong. Same for the plastic piston, it will wear faster with a stronger spring.

The stock spring diameter is 11mm.
__________________
Keep quiet. Sound travels faster than BBs.

Québec province's master age verification representative.
Drakker is offline   Reply With Quote
Old July 8th, 2016, 23:01   #8
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Barrels have literally nothing to do with range. I'm always suspect of companies that claim their product breaks the laws of physics.
ThunderCactus is offline   Reply With Quote
Old July 9th, 2016, 00:46   #9
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
I have an extra Dangerwerx Type B arm...
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old July 9th, 2016, 03:09   #10
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Forgot to mention, I have the PDI hop chamber and don't like it. It's designed for old fashioned hop rubbers like the W hold. Needs to be modified to work with flat hop. HUGE pain in the ass to adjust the hop.
ThunderCactus is offline   Reply With Quote
Old July 9th, 2016, 07:04   #11
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
I didn't read every post but. I didn't notice anyone mention volume. The stick cylinder matches about a 500 mm inner with a .25g bb. If you want to run 500 mm inner and heavy bb's you may need to go with the bore up. However if you stick at 400-455 you can run stock cylinder and heavy bb's no problem.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old July 9th, 2016, 09:08   #12
Drakker
Official ASC Geomorphologist
 
Drakker's Avatar
 
Join Date: Sep 2009
Location: Montr?al south shore, Qc
The PDI chamber is great for flat hops and r-hops. Flip the arms so that the flat side is down and stick an m-nub on them. There's a thread on this on airsoft mechanics.
__________________
Keep quiet. Sound travels faster than BBs.

Québec province's master age verification representative.
Drakker is offline   Reply With Quote
Old July 9th, 2016, 12:23   #13
Crowin
 
Join Date: Sep 2009
Location: Kitchener-Waterloo-London
Send a message via MSN to Crowin
A longer Barrel will give you more range, if you have excess air volume. More barrel will give you more fps. Which will give you more range. Even a tight bore barrel can increase fps.
__________________
lvl 3 sniper Certified
Crowin is offline   Reply With Quote
Old July 9th, 2016, 12:59   #14
cetane
 
cetane's Avatar
 
Join Date: Jun 2010
Location: Markham & Stouffville - Ontario - Canada
This seems to be a good unit too if running vsr cut barrels...




http://www.action-army.com/images/pa...er/chamber.htm


http://www.airsoftsniperforum.com/41...p-chamber.html
cetane is offline   Reply With Quote
Old July 9th, 2016, 13:16   #15
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Quote:
Originally Posted by Crowin View Post
A longer Barrel will give you more range, if you have excess air volume. More barrel will give you more fps. Which will give you more range. Even a tight bore barrel can increase fps.
Yeah but its not the barrel increasing range.
Air volume is a tricky thing. You might increase your fps on .20s with a longer barrel but you might be losing fps on .36s.
My M24 does 380 on .20s, dont even need an MED. But it shoots 2j on .36s, which is 470 on .20s.
The piston is going to make way more difference in fps than the barrel; using a lighter piston I go to the same 380fps on .20s, but way up to 2.7j on .36s.

Last edited by ThunderCactus; July 9th, 2016 at 13:37..
ThunderCactus is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 13:08.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.