|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 2nd, 2016, 00:24
|
#1 |
|
mosfets suitable for aeg
Hey everyone,
I'm about to re wire my g36 and I want to solder up a mosfet to add in. What are some suitable mosfets that I could find at my local electric supply shop? I Found 1 that is currently out of stock (Jrl14042) but I figure there should be a number of suitable candidates. does anyone know of any others? Thanks in advance |
|
|
|
|
March 2nd, 2016, 00:56
|
#2 |
|
"I like syrup on my blue waffles." #diseasedvagina
|
What brand g36 is it? (just curious)
|
|
|
|
|
March 2nd, 2016, 01:02
|
#3 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
What brand of G36 is it? (actually need to know)
|
|
|
|
|
March 2nd, 2016, 01:46
|
#4 |
|
"bb bukakke" KING!
|
anything with a microswitch will need special hardware to debounce the signal noise from the switch. If it's the marui style fork switches and shuttle then a 3034 is the standard beefy fet most homebrew makers use.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
|
|
|
March 2nd, 2016, 01:50
|
#5 | |
|
I like the SUM110Nxxxx series from Vyshay Siliconix. They take a beating, but you NEED to install a protection diode next to it.
__________________
Quote:
|
|
|
|
|
|
March 2nd, 2016, 11:42
|
#6 |
|
It WAS just a JG I got through a mystery box contest but the only thing JG that is left is the actual body of the rifle and the trigger. It does have the fork contacts so no micro switch. I don't see a 3034 at the store (sayal electronics) but I do see an irf3205 which I hear will work. Any other variations I can use?
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
