Best v2 gearbox sheel

[DarkJTF]

Need to replace my gearbox shell (G&G blowback syndrome)

So I'll go without blowback, want reability before cool factor.

I find some brand interesting.

which one I should buy :

Dropfire
Bravo
Guarder
Modify
Another one ?

[pestobanana]

Just get a stock VFC one. They're cheap and good enough.

[DarkJTF]

Who selling them ?

[pestobanana]

Mach1 Has them, or you can order directly from VFC.

[lurkingknight]

not sure if the vfc gearbox will fit in a G&G... on top of a g&g meant to have a toptech gearbox.

[Kos-Mos]

VFC won't fit in a G&G Toptech

Get the CM16 series G&G mechbox. It's insanely better than the toptech one.

[lurkingknight]

the toptech gearboxes that have the pneumatic crap on top are also part of the bolt plate assembly on the ARs and mp5s I've worked on, so putting in a standard v2 will mean you can't have a charging handle or bolt cover/fake bolt in your ARs.

You can get the toptech gearbox and just disable the pneumatic portion. Upgrade your cylinder head and install a sorbo pad on the cylinder head. That will prevent the gearbox from from cracking off.

[DarkJTF]

Can I use a non blowback charging handle ?

[DarkJTF]

Someone gave me a Classic Army V2 gearbox shell from a Scar-l

this will fit (except for the charging handle)

This is good enough ?

I use it to 30C to -10C

[DarkJTF]

Ok so Finally I'll fit a Lonex Shell, with near complete Lonex and Zci parts inside