Snappy Response without going Lipo.

Able1 · April 10th, 2015, 22:06

Hey, I am currently looking to get my internals redone, I want a johnny on the spot trigger response without going Li-po and keep er' at a healthy 350FPS.
Where should I start?

R.I.T.Z · April 10th, 2015, 22:10

Mosfet.

Styrak · April 11th, 2015, 00:30

9.6v large type battery.

Wrath144 · April 11th, 2015, 01:19

What misconceptions do you hold that prevent you from getting lipos?

pestobanana · April 11th, 2015, 01:43

You should start by reassessing your battery options. You are not going to get "johnny on the spot" trigger response unless swap over to 11.1.

Current output on Ni-MH batteries is too crappy for your gun to fire in the same century that you pulled the trigger.

Chillyrabbit · April 11th, 2015, 01:54

Quote:

Originally Posted by Able1

Hey, I am currently looking to get my internals redone, I want a johnny on the spot trigger response without going Li-po and keep er' at a healthy 350FPS.
Where should I start?

This Reddit post seems really informative, and might make me consider getting an 11.1V lipo if it would significantly increase trigger response while I am upgrading.

ThunderCactus · April 11th, 2015, 02:09

Theres nothing wrong with going lipo. Theres more advantages than just the voltage

Ricochet · April 11th, 2015, 03:39

Yes, the trick is quality lipo's and quality balance charger. Good lipos are only about $10 and a good charger is under $50, if purchased from the right retailer!!!

Able1 · April 11th, 2015, 12:39

If I end up taking the Li-Po train, I'd need to upgrade my internals correct?

ThunderCactus · April 11th, 2015, 13:08

Let me ask you this:
What's the difference on your internals between running 30rps on an NiMH battery versus running 30rps on a lipo battery?

Able1 · April 11th, 2015, 13:10

when you put it that way? nothing at all. I'll just run stock gears until something catastrophic happens.

ThunderCactus · April 11th, 2015, 13:34

My point is you'd have to do the upgrades no matter what battery you chose.
But as for actual advice:
high torque motor (either neo magnet/high speed or ferrite magnet/high torque)
high speed gears
7.4v lipo
mosfet

lipos will provide more amperage in a small battery, meaning more torque in the motor getting those gears up to speed faster.

Zfurlong · April 14th, 2015, 05:20

I would recommend a lonex Titan motor paired with a MOSFET and 7.4 lipo
Here is a link about lipo batteries and just about every question you could have will be answered in it
http://airsoftinsider.com/lipo-battery-myths-exposed/

Zfurlong · April 14th, 2015, 05:24

And this link is full of batteries that will suit your needs.

http://www.hobbyking.com/hobbyking/s...nano_tech.html

Read the iinfo found in the first link I sent first to assess what your needs actually are in a battery before making your choice.
P.s: if you leave the link open on a battery you like and want for about a half hour, you should get a popup offering a discount on the battery.

Azathoth · April 14th, 2015, 12:06

Quote:

Originally Posted by ThunderCactus

Let me ask you this:
What's the difference on your internals between running 30rps on an NiMH battery versus running 30rps on a lipo battery?

The difference is that you would probably be running a 12v NiMH or maybe with the right setup a 10.8, the size and weight of that battery would suck.

Advice to the wise, Do not buy a charger from a airsoft retailer. Go to a RC shop, your dollar will get your much further.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 10th, 2015, 22:06	#1
Able1 Joeyaglr444 Trader rating Join Date: Mar 2006 Location: Toronto Ontario	Snappy Response without going Lipo. Hey, I am currently looking to get my internals redone, I want a johnny on the spot trigger response without going Li-po and keep er' at a healthy 350FPS. Where should I start? __________________ It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam.

April 11th, 2015, 00:30	#3
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	9.6v large type battery. __________________ Airsoft Sales and Repair/Upgrade Services

April 11th, 2015, 01:19	#4
Wrath144 formerly steyr Trader rating Join Date: Sep 2005 Location: Winnipeg, Manitoba	What misconceptions do you hold that prevent you from getting lipos? __________________ BROFORCE Admin - Winnipeg Airsoft

April 10th, 2015, 22:10	#2
R.I.T.Z Crackers Trader rating Join Date: Mar 2009 Location: The Shwa	Mosfet.

April 11th, 2015, 01:43	#5
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	You should start by reassessing your battery options. You are not going to get "johnny on the spot" trigger response unless swap over to 11.1. Current output on Ni-MH batteries is too crappy for your gun to fire in the same century that you pulled the trigger.

April 11th, 2015, 02:09	#7
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Theres nothing wrong with going lipo. Theres more advantages than just the voltage

April 11th, 2015, 03:39	#8
Ricochet How much sand CAN you fit in your vagina!? Trader rating Join Date: Feb 2008 Location: North Delta, BC (Greater Vancouver)	Yes, the trick is quality lipo's and quality balance charger. Good lipos are only about $10 and a good charger is under $50, if purchased from the right retailer!!! __________________ I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...

April 11th, 2015, 12:39	#9
Able1 Joeyaglr444 Trader rating Join Date: Mar 2006 Location: Toronto Ontario	If I end up taking the Li-Po train, I'd need to upgrade my internals correct? __________________ It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam.

April 11th, 2015, 13:08	#10
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Let me ask you this: What's the difference on your internals between running 30rps on an NiMH battery versus running 30rps on a lipo battery?

April 11th, 2015, 13:10	#11
Able1 Joeyaglr444 Trader rating Join Date: Mar 2006 Location: Toronto Ontario	when you put it that way? nothing at all. I'll just run stock gears until something catastrophic happens. __________________ It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam.

April 11th, 2015, 13:34	#12
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	My point is you'd have to do the upgrades no matter what battery you chose. But as for actual advice: high torque motor (either neo magnet/high speed or ferrite magnet/high torque) high speed gears 7.4v lipo mosfet lipos will provide more amperage in a small battery, meaning more torque in the motor getting those gears up to speed faster.

April 14th, 2015, 05:20	#13
Zfurlong Trader rating Join Date: Sep 2014 Location: Oromocto	I would recommend a lonex Titan motor paired with a MOSFET and 7.4 lipo Here is a link about lipo batteries and just about every question you could have will be answered in it http://airsoftinsider.com/lipo-battery-myths-exposed/ __________________ current armament: mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.

April 14th, 2015, 05:24	#14
Zfurlong Trader rating Join Date: Sep 2014 Location: Oromocto	And this link is full of batteries that will suit your needs. http://www.hobbyking.com/hobbyking/s...nano_tech.html Read the iinfo found in the first link I sent first to assess what your needs actually are in a battery before making your choice. P.s: if you leave the link open on a battery you like and want for about a half hour, you should get a popup offering a discount on the battery. __________________ current armament: mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.

Snappy Response without going Lipo.

Upgrades & Modifications