|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 20th, 2014, 06:12
|
#1 |
|
We 18c glock nozzles
The only "upgrade" I've found was being sold on Evike.com. The brand was Angel. Thinking this would improve the performance, I ordered a few of them. Turns out, after being installed, they worsen the performance as after 5 or six shots are fired, the magazines dump all the gas.
Anybody know of any other nozzles which fit the WE 18C Glock and improve both performance and durability. I hear the original WE nozzles break often. However, I've yet to break one. Thanks in advance. |
|
|
|
|
October 20th, 2014, 09:10
|
#2 |
|
They only break if you don't modify the spring guide that pops the nozzle back into place. You need to cut the plastic guide down by about 2-3mm and then you shouldn't have any issues.
|
|
|
|
|
|
October 20th, 2014, 16:10
|
#3 |
|
The guide is metal, but yes you can cut off about 1/3 and it won't break nozzles anymore.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
October 20th, 2014, 18:08
|
#4 |
|
Wierd, mine was plastic and the replacement one I got was plastic.
|
|
|
|
|
|
October 20th, 2014, 23:35
|
#5 | |
|
Quote:
__________________
|
|
|
|
|
|
October 21st, 2014, 00:03
|
#6 |
|
Yeah that's what I'm referring to. My spring guide was plastic.
|
|
|
|
|
|
October 22nd, 2014, 11:13
|
#7 |
|
Thanks guys for the help. Much appreciated.
|
|
|
|
|
|
October 29th, 2014, 01:31
|
#8 |
|
With a little modification (sanding) you can make a G17 nozzle work. I modified a Guarder reinforced nozzle made for TM G17 fit on my G18C. You just need the sand down the extra plastic. If you hold the OEM nozzle and a G17 nozzle side by side you will know exactly what needs to be done. The difference in plastic quality is astounding.
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
