|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 7th, 2005, 21:14
|
#1 |
|
Crane stock installation?
I just bought the Crane stock and i have no idea how to install this. The instructions are so unclear and it was a photo copy thats half assed...
I already have the wire done in the back since my M4 was a full stock. Thanks guys |
|
|
|
October 13th, 2005, 04:10
|
#2 |
|
what brand of stock do you have? Did it come with a new buffer tube?
|
|
|
|
|
October 13th, 2005, 04:47
|
#3 | |
|
Quote:
Sorry to thread jack... similar question. In my case, I have a Star 'clubfoot' modstock going on an M4-S. Guy who's doing it for me has routed the battery wire through the stock tube but here's the kicker: the stock Marui tube has no wire hole on the inner screw cap that holds the tube to the body. Are there parts available for this, or is it just hack a chunk out of the metal cap? sry,thx!
__________________
|
|
|
|
|
|
October 14th, 2005, 03:12
|
#4 |
|
|
You can do either. You can buy a new buffer tube which comes with that thick washer pre cut for the wires to pass through, or you can just use a grinder to do it yourself. If you want a pre cut stock tube, let me know, I have a Star tube for $40, brand new. (PM if interested)
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
