February 9th, 2014, 18:32 | #1 |
VLTOR SCAR M4 Stock Adapter
There is a very dead thread that touched on this, but I didn't want to necro: I am curious to know if anyone has given this a shot on a WE SCAR-L as of yet?
http://www.vltorstore.com/re-scar-sc...stock-adapter/
__________________
Guardians of Asgaard |
|
February 9th, 2014, 20:58 | #2 |
AV revoked.
|
Im curious to see if anyone has tried this one
http://www.vltorstore.com/scar-stock-vltor-scar-stock/ edit. Just did a little googling and saw that the stock i posted fits on a WE Scar Last edited by lanepratt; February 9th, 2014 at 21:06.. |
February 10th, 2014, 17:54 | #3 |
February 11th, 2014, 10:34 | #4 |
Kos-Mos, beating the almost-dead horse; any idea regarding compatibility with WE SCARs?
__________________
Guardians of Asgaard |
|
February 11th, 2014, 16:13 | #5 |
Dunno and don't plan on finding out. I like my SCAR the way it is.
|
|
February 11th, 2014, 16:29 | #6 |
February 11th, 2014, 16:42 | #7 |
VLTOR SCAR M4 Stock Adapter
I plan to get one from http://www.airsoftoutletnw.com/airso...-stock-adapter
I don't like the way the Scar-L pushes on my hand when folded. The G39C I had didn't do that. Anyway, if I'm not happy with it, I'm sure someone on Kijiji will take it off my hands. Last edited by siggypoo; February 11th, 2014 at 16:48.. |
|
February 12th, 2014, 09:31 | #8 |
After some searching I've decided to go with the Angry Gun stock adapter. Main reason being I can add a MILSPEC buffer tube and a Magpul ASAP plate. Boom bitches.
__________________
Guardians of Asgaard |
|
February 12th, 2014, 09:59 | #9 | |
Yeah, or you can go to Evike and get 20% off..
Just saying. http://www.evike.com/products/41624/ Also seems to work on AEG's Quote:
|
||
February 12th, 2014, 21:53 | #10 |
After some review of current ASAp plates I have installed on my AEG and GBB ARs I likely wouldn't be able to use an ASAP with the Angry Gun adapter without some serious modification.
There are "tab" on either side that act as seating lips around the edges of the AR receiver. Feel silly for missing that.. Would have to grind quite a bit off and that might ruin the stability of the plate.. I'm wondering; I know the ones on the side are supposed to be, but is that a QD sling swivel hole directly underneath the buffer tube?
__________________
Guardians of Asgaard Last edited by Zack The Ripper; February 12th, 2014 at 22:02.. |
|
February 12th, 2014, 22:06 | #11 |
Jamroz
|
It is not, it just a hole for the screw to screw it in the back of the gun to secure it. I have this adapter for my Echo1 scar
|
February 12th, 2014, 22:16 | #12 |
Ghhhheeeeeeeyyyyyyyyyyyyyyyyy.
Well, I guess I'll have to get the Angry Gun adapter to do that heavy grinding on the ASAP plate and hope it holds.
__________________
Guardians of Asgaard |
|
February 12th, 2014, 22:23 | #13 |
Najohn
|
What about the RA-Tech Adaptor
|
February 13th, 2014, 11:25 | #14 |
:-O
That is perfect. I'll have to go onto the site later to check out cost+shipping. Thanks Short Round. This is why I like ASC.
__________________
Guardians of Asgaard |
|
February 13th, 2014, 22:30 | #15 |
I'm lookin, but I haven't seen if any of them can hinge to the side. That'd be perfect.
|
|
|
Bookmarks |
|
|