January 27th, 2013, 18:33 | #1 |
Integral suppression LOOK M4 AEG
I own a King Arms OA-15 M8. I have always been intrigued while surfing
AR-15 forums and their amazing forums about integral suppressed ARs. I want to achieve a similar look with my OA-15 with the suppressor protruding a little more from the rail. My gun has an 8 inch rail system So I was looking for a VERY small outer barrel (2inches) OR ADAPTOR and attaching a 6 - 7inch barrel extension to it so resembles an integral suppressed AR. The rail systems diameter is an inch and three eights at its smallest point so the suppressor diameter would need to be smaller then that. Does anyone know a better way of doing this? OR where I can find a very short outer barrel/adaptor? THIS INTO THANKS FOR YOUR HELP I WILL POST PHOTOS OF THE PROGRESS!! PROGRESS PHOTOS Last edited by BELObeatz; February 12th, 2013 at 00:00.. |
|
January 27th, 2013, 18:48 | #2 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Just buy a short outer barrel (shortest in stock one i seen was at airsoftparts.ca 7.5inch) and a silencer in the appropriate length.
Or u can ask airsoftdepo.ca if the will get anymore of the 5inch outer barrel they are out of stock Then chose the length of silencer u need airsoftpartz has em from 110mm way up to 245mm with a few sizes inbstween and they are 30-45 mm in diameter and he also has 1 and 2inch berrel extensions so u can likely find the right combo to get the length u need for the look your goin for
__________________
Quote:
FinchFieldAirsoft |
|
January 27th, 2013, 19:31 | #3 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Or if u know of a local machine shop u can have them cut and rethread the outer barrel to the last lil wide spot or prolly yer lotal mechanic could cut the barrel at the back end then cut a section of the front end to the length u need and weld it back on the base of the barrel.
There i thinks that covers about all yer options
__________________
Quote:
FinchFieldAirsoft |
|
January 27th, 2013, 19:33 | #4 |
Thanks! Id love smaller than that even. Might have to cut and rethread my outer barrel myself... hmmmmm..
|
|
January 27th, 2013, 19:34 | #5 |
I posted that before reading your follow up! Great help. Thanks!
|
|
January 27th, 2013, 19:43 | #6 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
No worries just be carefull where you cut to rethread youll need one if the thick parts to rethread so maybe the cut and weld option is better if u wanna go really short on the barrel.
Id prolly first find a silencer that works for u then adjust the length of the barrel to fit. Also id take a close look at the barrel it may alrdy be a 2 peice or like my first m4 it may just have a crappy tube starting halfway down that just held to the front and base with set screw. There are other short barrels but they come with whole front sets so the cozg like 70 bucks or more so i figured you prolly didnt wanna go that route
__________________
Quote:
FinchFieldAirsoft |
|
January 27th, 2013, 19:55 | #7 |
The easiest way would be to buy a 14.5" outer barrel or something for like $30-40. Otherwise madbull has barrel extensions, I'm sure other companies have them as well they're not that hard to make.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
January 27th, 2013, 20:18 | #8 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
?? Im not sure u got what the OP is trying to do. They want go have as short of an outer barrel as posible then they want to run as long a silencer as they can inside the rail system out to the front for the integrally suppresed look
__________________
Quote:
FinchFieldAirsoft |
|
January 27th, 2013, 20:20 | #9 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Like so
Wow i just noticed how goofy that looks with the 9mm or. .22cal mag in the m4 magwell lmao thats ugly ill find a real pic lol
__________________
Quote:
FinchFieldAirsoft |
|
January 27th, 2013, 20:23 | #10 |
Dismantled this is what I am looking at. Metal outer barrel
Close up of where I want the outer barrel to end 2 inch outer barrel would be PERFECT |
|
January 27th, 2013, 20:27 | #11 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
There ya go that looks a lil better still. .22 i think tho by the look of the mag
__________________
Quote:
FinchFieldAirsoft |
|
January 27th, 2013, 20:31 | #12 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
In that case id suggest u just hack off the barrel at the hump by yer hand and buy a 2inch barrel extension for 10 bucks and weld it on to the hump or cut it a lil longer thread it 14mm- and just screw the 2inch extension on
__________________
Quote:
FinchFieldAirsoft |
|
January 27th, 2013, 20:34 | #13 |
This is my PAINT handy work!!
The desired look I want. |
|
January 27th, 2013, 20:43 | #14 |
aka coachster
|
If its just for the "look" leave everything as is. Get someone to roll some sheet metal to a diameter that fits inside your rail but large enough to fit over an existing mounted suppressor. If you need it to look pretty, make an end cap.
You are simply just making a slip over suppressor extension. It is mounted via the original suppressor to the outer barrel. JB weld them together and go shoot your buddies. |
January 27th, 2013, 20:57 | #15 | |
Quote:
I believe there are 4" Outer barrels out there. Deepfire makes one but it's pretty pricey at $80 (however it does come with an inner barrel and hop up unit). If the OP wants to use that just swap out the inner barrel with a longer one and mount a suppressor on the end of that: http://redwolfairsoft.com/redwolf/ai...ner_Barrel.htm I also believe I've seen kits like that made by JG and Element before too. There's also the Arrow Dynamic outer barrels they come in a variety of sizes from 40 mm to 70 to 140mm so that could do the trick for a super short OB. After that it's just a matter of finding a suppressor long enough to make it look good. http://shop.ehobbyasia.com/ad-classi...er-barrel.html http://shop.ehobbyasia.com/ad-classi...er-barrel.html
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
||
|
Bookmarks |
|
|