ICS M4A1 w/ RS style d-ring and MOE handguards! :D (really not that hard)

[kbeckerton]

check it out :O its sexy, lol

Before:
DSCN1374.JPG

After:
DSCN1373.JPG

[THe_Silencer]

It's an ICS so its automatically not.

[R.I.T.Z]

its cool but.... thats about it

[Eeyore]

Hey look its a stock M4, oh wait no sorry its a stock M4 except for a plain black hand guard.

[R.I.T.Z]

Originally Posted by Eeyore

Hey look its a stock M4, oh wait no sorry its a stock M4 except for a plain black hand guard.

and the mag...



anyways.
its ok for your first try at customization.
for examples look here http://airsoftcanada.com/showthread.php?t=61640

[cadpat_tact]

I for one think it's cool. Would you care to explain how you modified it?

[kbeckerton]

hey hey now this is my first AEG so sorry if i get a little excited lol.. next will be the moe pistol grip, which i understand might be a pain too, then the ubr stock.. and lastly internals..

so how i did this was i got my hands on a rs style delta ring that matches the threads on the ics reciever (aparently the KA ones work) and just any old rs style handguard cap. On the reciever end of the ics outer barrel there are 2 tabs either side of the barrel that you need to dremel down so that the KA delta ring will fit all the way down. take the old handguard cap off and put the new one on the same way but add a small washer on the screw because the hole in the rs style one is bigger than the ics screw. Once these are installed you can basically put any aftermarket handguard on, i just found that i needed to adjust the outer barrel length at the joint near the front sight because the ics handguards are slightly shorter than normal. and there you go. i was actually gonna write a tutorial but i thought it might be too witty for my first real post. i have pictures if you need.

[apparition]

how could you butcher my old gun with a MOE front set ='( sniff sniff i hate those things ugh haha. Sweet you got a different delta ring to go on though. Im sure ill like the UBR stock though =D. Put a Daniel Defence or Noveske rail on it and it will look SOOOO much better

[kbeckerton]

sorry man, lol i dont like the look of full rails and i wanted something a little more aggressive than stock, but at least if i ever change my mind i can fit anything now

[kbeckerton]

im gonna have to make a little more room in the tube when i do the ubr stock though, i wanna put a 7.4 lipo in there but im not sure it will fit...

[HKGhost]

Another Magpulized M4, so what else is new? If I got a dime for every Magpulized M4 on this forum, I'll retire. By the way, nice M4

[Curo]

HKGhost, seeing as many of those Magpul parts came from your (wonderful/awesome/amazing) store, I sure you got that dime ^^.

It's not original, but its your rifle do with what you like.

[HKGhost]

Originally Posted by Cobalt Caliber

HKGhost, seeing as many of those Magpul parts came from your (wonderful/awesome/amazing) store, I sure you got that dime ^^.

It's not original, but its your rifle do with what you like.

I don't own ASP so no, I don't get a dime. But you're welcome to give me your dimes

[Curo]

LOL saw it in your signature and thought, but hey still a great store by all accounts. And if you want Magpul parts for your rifle thats the best place to get them IMO.

[kbeckerton]

actually you guys should check out airsoftpartshop.com hes out of quebec and i cant find a better price for those handguards anywhere!

it might not be original yet but it will be when its done, it is actually too bad its an ics otherwise i would swap in a c7a2 lower..