|
|
|
October 4th, 2011, 01:45
|
#1 |
|
Lipo Problem
I recently ordered this lipo http://shop.ehobbyasia.com/bb-batter...m-battery.html I have a tenergy smart charger, but the problem is I've been charging it for almost 3 hours and nothing's been happening. Is it supposed to take that long? The light on the charger was flashing red the whole time, which in the manual said that when the light is red it's charging. Not really sure what's going on as it's my first lipo. Am I doing something wrong? I even got one of these guys http://www.airsoftparts.ca/store2/in...oducts_id=1841 but when I plugged it in when I first got it it didn't read anything.
Maybe I'm getting a little impatient as I'm really tired and I need it before the weekend.
__________________
WE M4 Raptor VFC HK416 KWA MP7A1 KWA HK45 VFC SCAR-L G&P VLTOR M4 KJW Hi Capa Last edited by Mandalore; October 4th, 2011 at 01:54.. |
|
|
|
October 4th, 2011, 02:01
|
#2 |
|
It should NOT take 3 hours to charge, especially the first charge since it's shipped at a half charge. My guess is it's dead or there's a bad connection. Do you have a multimeter? If so, check the cell voltage. If not, go buy one you cheapass, you can get them for like $10 and they are a good tool to have..
|
|
|
|
|
October 4th, 2011, 06:20
|
#3 |
|
Did you plug in all the connectors.For example the white connector with the three other coloured wires.If i do not plug these wires in also,my charger will say BATT break and will not charge the battery.I think the white connector is a balance port.
__________________
 BA lvl2 Certified
|
|
|
|
|
October 4th, 2011, 09:06
|
#4 |
|
Smart chargers are garbage for lipo. Get a delta peak detection lipo charger/balancer. It will give you many charging options IE: lipo charge, lipo balance, lipo storage etc....
It should not take that long unless you are charging it at like 0.1amp. What rate are you charging it at? How many amps? |
|
|
|
|
October 4th, 2011, 10:33
|
#5 |
|
Tys
|
1. ALWAYS Balance Charge LiPo batteries. To not do so is foolhardy and inviting trouble.
2. Learn how to use your charger. Hobby Shops will run you through one if you're buying from them. If you bought on-line and aren't getting that help from whomever you bought it from (that tells you something about the seller) then either research the crap out of it until you figure things out....or find a buddy at the next game to show you what to do. 3. The LiPo low voltage alarm will only be triggered when the cells drop below 3.0V. ASSUMING that your pack is not completely dead (they rarely ever are), if it's not setting off the alarm all that tells you is that there's some charge over 3v/cell. They could be 3.1/3.1/3.1. Look for a meter (looks similar to the alarm you bought) that displays the individual cell voltage and the total pack voltage. 4. If you're not sure if the pack is dead-dead or not...take it to someone who knows what they're doing and get them to charge it for you. Ask the seller you're buying from if they check/charge the battery before it goes out to you. Best of luck |
|
|
|
|
October 4th, 2011, 12:41
|
#6 | |
|
I see this over and over and over again.
Airsoft branded batteries and chargers are almost always complete garbage & overpriced. Go to a RC/Hobby store and buy those items from those people and ask TYS mensionted above they will run you down on the how to's.
__________________
Do you know what ruins airsoft? (Chair), (Drama), (Air), (Sugar) softers, filthy casuals --- Quote:
WANTED PTW Receiver PRIME, STG, Factory |
|
|
|
|
|
October 4th, 2011, 16:08
|
#7 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
^ +1
|
|
|
|
|
October 4th, 2011, 18:27
|
#8 | |
|
|
Quote:
|
|
|
|
|
|
October 4th, 2011, 20:16
|
#9 |
|
|
Yeah it's gotta be the charger. Somehow I didn't think I should've bought it, but live and learn. Hate losing money over it though. Thanks for the tips guys!
__________________
WE M4 Raptor VFC HK416 KWA MP7A1 KWA HK45 VFC SCAR-L G&P VLTOR M4 KJW Hi Capa |
|
|
|
|
October 6th, 2011, 12:52
|
#10 | |
   Join Date: Feb 2005
Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401
|
Quote:
Flashing red means the charger has detected a problem with the battery. Either 1) voltage of one or more cells is way below threshold 2) Reverse polarity 3) a short in the wiring It will not proceed with the charge cycle if any of the above is detected . So the charger is doing it's job. (When charging it will show a solid red light, no flashing) The problem here is the battery, since there is no response from the lipo alarm, there is likely a short somewhere in the pack or the cells are just drained way too far. A better charger may be able to revive the pack if it is a low voltage problem, or it may cause it to inflate like a balloon LOL Your best solution is to get a new battery.
__________________
|
|
|
|
|
|
October 6th, 2011, 15:14
|
#11 | |
|
Quote:
|
|
|
|
|
|
October 6th, 2011, 20:59
|
#12 |
|
|
I'm not sure if this was a good idea or not, but I did this before reading those last two posts. I charged it with another charger, and it did take awhile but eventually it said it was done charging. I plugged it into my MP5 and it cycled the gun... I still wonder if I should consider getting a different one just in case?
__________________
WE M4 Raptor VFC HK416 KWA MP7A1 KWA HK45 VFC SCAR-L G&P VLTOR M4 KJW Hi Capa |
|
|
|
|
October 6th, 2011, 21:13
|
#13 | |
|
|
What you just did is the ghetto way of bringing a lipo pack back to life.
Not my decision to keep or toss, but I would have thrown the battery out or asked for a refund long ago.
__________________
Do you know what ruins airsoft? (Chair), (Drama), (Air), (Sugar) softers, filthy casuals --- Quote:
WANTED PTW Receiver PRIME, STG, Factory |
|
|
|
|
|
October 15th, 2011, 11:45
|
#14 | |
|
Quote:
__________________
"Creator of the Zombat Sniper - oh yeah baby"
|
|
|
|
|
|
October 15th, 2011, 16:28
|
#15 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
FYI bought the 11.1v 20C 4900mah LiPo for my M249 for just $50 off hobbyking
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
