|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 8th, 2005, 01:37 | #1 |
TM M4 S-System full stock ?
Hi... I'm looking into buying a TM M4 S-System and I was woundering if you could mount a SR-16 Full Stock on it ? Is the S-System as the same "attachement" for the stock as the old M4 series ??
Thanks
__________________
Sgt. Syrinx 2ic Alpha Detachement 1st Pathfinders Regiment |
|
June 8th, 2005, 01:48 | #2 |
Yes it will fit.
__________________
|
|
June 8th, 2005, 01:57 | #3 | |
Quote:
__________________
Sgt. Syrinx 2ic Alpha Detachement 1st Pathfinders Regiment |
||
June 8th, 2005, 02:25 | #4 |
Just the spacer on the M4-S slither stock will have to be cut so it can fit the SR16 stock. I had it done on mine and it's fine.
__________________
Mississauga & Brampton Regional Representative. Need to get verified? Send me a PM |
|
June 8th, 2005, 03:15 | #5 |
Thanks...
__________________
Sgt. Syrinx 2ic Alpha Detachement 1st Pathfinders Regiment |
|
June 8th, 2005, 12:26 | #6 |
Pics!
|
|
June 12th, 2005, 03:09 | #7 | |
yeah that would look pretty cool, if possible you should try and get some pics of that, it would be nice to see
__________________
Pantless_Crab Wrote: Quote:
|
||
June 13th, 2005, 21:07 | #8 | |
Quote:
__________________
Sgt. Syrinx 2ic Alpha Detachement 1st Pathfinders Regiment |
||
June 13th, 2005, 21:28 | #9 |
Ban-Fu Sifu
|
installing the full stock is a real simple thing to do. same as all other crapalite series. rewireing the gun is well an other story but easy to do...modded two of them already
__________________
Vondnik, team Bad Karma, PQAC Murphy's second rule: Nothing is impossible for the man who does not have to do it himself. |
June 14th, 2005, 18:33 | #10 | |
very good, i was thinking of doing the same mod
so some pics would be appreciated very much
__________________
Pantless_Crab Wrote: Quote:
|
||
June 14th, 2005, 18:58 | #11 |
Please keep in mind you may need a longer wire to move eveything to a sold stock. Also your probly going to have to dump the fuse plate and fuse. or you can try an RC hobby shop for a small fuse protector
|
|
June 15th, 2005, 11:52 | #12 |
Well, if the full stock comes complete with wiring he shouldnt need to worry about it none. The wiring should have a fuse holder built in, just add a new fuse and go.
Like what is found in the link below is all you ned to attach and rewire the stock: http://www.wgcshop.com/pcart/shopper...16S_cat_Stocks
__________________
Do you have any MP5 accessories that you're looking to get rid of just let me know. |
|
June 17th, 2005, 23:41 | #13 |
As promise, here are some photos of my new TM M4 S-System with the full stock modification. As Vondnick said it was realy easy to do. The stock fit's like a glove. The only "tuff" part is to re-route the wires to the back. Of course, by doing this you have to open the gearbox. I used an SR-16 stock with all the wires and fuse attachement. Ho and don't forget the "stock spacer". You have to cut it down a little before the wires can get through.
So enjoy... Click here for pictures
__________________
Sgt. Syrinx 2ic Alpha Detachement 1st Pathfinders Regiment |
|
|
Bookmarks |
|
|