Mosfet for MP5?

[ryan1796]

Does anyone tried using mosfet on MP5(especially ASCU)?

Like most manual says it's for V2 gearbox but I think it'll work on V3 gearbox.

I'd like to try if I had one of ASCU but I don't..

So can someone tell me if it's possible or not?

[Styrak]

The MP5 is a V2 gearbox.

[IggysPiggy]

if you dont know what version box it fits (or what version your aeg is) a little bit of research might be in order before you start this venture.

[Manni]

well its only version 2 if its not a mp5k or pdw. Cause i know those 2 are normally V3 but ive always wanted to try to mod one to work

[ryan1796]

Sorry I was meant for MP5K, should've mention before.

@IggysPiggy// and yes, I did my research. And there was nothing about mp5 mosfet compatible thread, thanks.

[CDN_Stalker]

I have a Trigger Master circuit in both my MP5s, mind you it's much more than just a MOSFET, and bigger, so yes a simple MOSFET will work in an MP5K, provided you can find a space to put it in, and have a safe wiring route from inside the mechbox to the MOSFET. Mine are stored in the front grip, and I ran the wires through the lower font of my mechbox, but had to cut a hole in the body behind the mag release to get the wires through.

[ryan1796]

Originally Posted by CDN_Stalker

I have a Trigger Master circuit in both my MP5s, mind you it's much more than just a MOSFET, and bigger, so yes a simple MOSFET will work in an MP5K, provided you can find a space to put it in, and have a safe wiring route from inside the mechbox to the MOSFET. Mine are stored in the front grip, and I ran the wires through the lower font of my mechbox, but had to cut a hole in the body behind the mag release to get the wires through.

Alright, so it is possible. I was wondering if it'll fit in the front along with the battery and the wiring.

Thanks for the help, you're the boss!! You know everything