GBB 1911 compensator ?

Padkiller · February 2nd, 2011, 15:20

Hi all !

So, I'm about receive my WE 1911 KnightHawk.
So, I wanted to add a compensator to it, but I don't know how !
Do I need to have a 14mm threaded barrel to add it on ?

Thanks !

sushicake · February 2nd, 2011, 16:45

Yes you do. It wont magically stick to the barrel. Unless the WE you're getting comes with a threaded barrel already on it, some of the we guns come with the thread adapter.

Airsoftparts has this piece that you be interested in.

http://www.airsoftparts.ca/store2/in...oducts_id=1854

MrBond · February 2nd, 2011, 17:40

If it's a bushing-type compensator, it'll be held by the said bushing wich most WE 1911 have.

AngelusNex · February 2nd, 2011, 18:38

depends on the compensator, some are designed to go on threading some aren't (for pistols that is)

Padkiller · February 2nd, 2011, 18:45

Thanks guys, but I found a comp at airsoft parts which replaces the 1911 bushing, it just "clamps" on the 1911's front barrel bushing !

http://www.airsoftparts.ca/store2/in...oducts_id=1999

pusangani · February 2nd, 2011, 20:05

The punisher one replaces the bushing, it only fits WE tho, won't fit ARMY or TM, the notch inside the slide on the ARMY and TM is located deeper inside than on the WE which has it closer to the front of the slide.

If you dremel the notch wider in the direction of the front of the slide it will fit, do it little by little and keep checking if it fits to ensure a tight fit.

*edit* It also fit my SD STI Executive slide snugly as well.

MrBond · February 2nd, 2011, 20:15

Quote:

Originally Posted by Padkiller

Thanks guys, but I found a comp at airsoft parts which replaces the 1911 bushing, it just "clamps" on the 1911's front barrel bushing !

http://www.airsoftparts.ca/store2/in...oducts_id=1999

That's the one I was talking about. Love that thing on my SOCOM Punisher 1911 custom...

Padkiller · February 2nd, 2011, 20:36

Quote:

Originally Posted by MrBond

That's the one I was talking about. Love that thing on my SOCOM Punisher 1911 custom...

Good gun, the punisher !!!
I just watched the movie on itunes because of you !!!!

MrBond · February 2nd, 2011, 21:43

Quote:

Originally Posted by Padkiller

Good gun, the punisher !!!
I just watched the movie on itunes because of you !!!!

The last one or the one before ? The last one had good gore but the story and main vilain sucked ass... the one before is the best one IMO.

bareass · February 3rd, 2011, 00:19

Quote:

Originally Posted by MrBond

The last one or the one before ? The last one had good gore but the story and main vilain sucked ass... the one before is the best one IMO.

please watch the 1980's punisher (the punisher) with Dulf Lundgren and re-evaluate!

Adamlxlx · February 3rd, 2011, 00:58

^Truth!

MrBond · February 3rd, 2011, 01:39

Quote:

Originally Posted by bareass

please watch the 1980's punisher (the punisher) with Dulf Lundgren and re-evaluate!

Well it's all a question of taste I guess... haven't seen the first one since way back when it came out. Should probably download it but back when I was a fanboy of the comic book and it came out, I remember being really disapointed...

Padkiller · February 3rd, 2011, 08:12

Quote:

Originally Posted by MrBond

Well it's all a question of taste I guess... haven't seen the first one since way back when it came out. Should probably download it but back when I was a fanboy of the comic book and it came out, I remember being really disapointed...

Yes, the 2004 version is the best !!!
Dolph's version is good, but not that much !!!

glm · April 25th, 2012, 19:24

Anyone knows where I can buy this socom PUNISHER 1911? Thanks.

Styrak · April 25th, 2012, 20:02

Not without being age verified, no.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 2nd, 2011, 15:20	#1
Padkiller Trader rating Join Date: Nov 2010 Location: In my pants, Quebec!	GBB 1911 compensator ? Hi all ! So, I'm about receive my WE 1911 KnightHawk. So, I wanted to add a compensator to it, but I don't know how ! Do I need to have a 14mm threaded barrel to add it on ? Thanks ! __________________

February 2nd, 2011, 16:45	#2
sushicake Trader rating Join Date: Dec 2008 Location: Markham, ON	Yes you do. It wont magically stick to the barrel. Unless the WE you're getting comes with a threaded barrel already on it, some of the we guns come with the thread adapter. Airsoftparts has this piece that you be interested in. http://www.airsoftparts.ca/store2/in...oducts_id=1854 __________________ "Don't you know the first law of physics? Anything fun costs atleast $8" Last edited by sushicake; February 2nd, 2011 at 16:49..

February 2nd, 2011, 17:40	#3
MrBond formerly tattoodan Trader rating Join Date: Jan 2009 Location: Montreal	If it's a bushing-type compensator, it'll be held by the said bushing wich most WE 1911 have. __________________ *Team Mandrills*

February 2nd, 2011, 18:38	#4
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	depends on the compensator, some are designed to go on threading some aren't (for pistols that is)

February 2nd, 2011, 18:45	#5
Padkiller Trader rating Join Date: Nov 2010 Location: In my pants, Quebec!	Thanks guys, but I found a comp at airsoft parts which replaces the 1911 bushing, it just "clamps" on the 1911's front barrel bushing ! http://www.airsoftparts.ca/store2/in...oducts_id=1999 __________________

February 2nd, 2011, 20:05	#6
pusangani Official ASC "Dumb Ass" Trader rating Join Date: Jan 2008 Location: Scarbrah, Ontario	The punisher one *replaces* the bushing, it only fits WE tho, won't fit ARMY or TM, the notch inside the slide on the ARMY and TM is located deeper inside than on the WE which has it closer to the front of the slide. If you dremel the notch wider in the direction of the front of the slide it will fit, do it little by little and keep checking if it fits to ensure a tight fit. edit It also fit my SD STI Executive slide snugly as well. __________________

April 25th, 2012, 19:24	#14
glm Trader rating Join Date: Sep 2011	Anyone knows where I can buy this socom PUNISHER 1911? Thanks.

April 25th, 2012, 20:02	#15
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Not without being age verified, no. __________________ Airsoft Sales and Repair/Upgrade Services

GBB 1911 compensator ?

Upgrades & Modifications