|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 30th, 2011, 23:32 | #1 |
g&g m4 commado
hi i have a g&g m4 commando, today when i hooked the battery up it went super hot and i hear sizzling so i quickly unplugged them. Do you think the gun is damaged?? Or just the batterys!
Please help freaking out here! The guns 3 days old |
|
January 30th, 2011, 23:33 | #2 |
Crackers
|
check the batteries. check the fuse, check the wires.
also pictures help |
January 30th, 2011, 23:33 | #3 |
I had the same problem with my G&G.
All you have to do is replace the battery. I recommend Intellect. I recommend you also get a smart charger.
__________________
|
|
January 30th, 2011, 23:33 | #4 |
there's a short somewhere. could be the battery or within the gun. Check the battery for any exposed insulation. then check the gun.
RITZ everywhere!!! I'll stop.
__________________
Please email me as I'm not on ASC too often. Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
January 30th, 2011, 23:35 | #5 |
the battery plug in on the gun has melted, i think i have 30days warranty so im going to bring it back to the store tomorrow. Hopefully its just the battery and the gun plug in that need fixed.
|
|
January 30th, 2011, 23:40 | #6 |
anyone know how to get at the fuse to see if it blew?
|
|
January 30th, 2011, 23:42 | #7 |
Crackers
|
|
January 30th, 2011, 23:46 | #8 |
no i meant where is the fuse located on the gun lol
|
|
January 30th, 2011, 23:47 | #9 |
Crackers
|
|
January 31st, 2011, 00:07 | #10 |
this stupid guns toast, wiring got pinched it looks like. garbage
|
|
January 31st, 2011, 00:13 | #11 |
warranty probobly dont even cover that, im gonna snap
|
|
January 31st, 2011, 00:38 | #12 | |
The batteries that come with those G&G guns are known for causing problems. That would be the first thing I would try.
Also, please fill out your profile (Location, .ect) so we can better help you
__________________
Quote:
Chinese proverb
|
||
January 31st, 2011, 00:49 | #13 |
well i took the back stock off and unscrewed whatever tube that is on the back, found pinched wires now my guns in peices and im about to start shedding tears lol.
|
|
January 31st, 2011, 00:50 | #14 | |
Where did you purchase it?
I believe G&G cansoft guns have a warranty (A rare thing in the world of airsoft) Even if its not covered by a warranty, wiring is cheap. If you have any experience with a soldering iron, you can do it yourself. If not, I'm sure you could find a gun-tech locally who would help you out.
__________________
Quote:
Chinese proverb
|
||
January 31st, 2011, 00:53 | #15 |
do you think its covered under warranty even if i caused it?? i think i was tightening the rear stock cause it felt loose...not my fault the wires pinched, right or wrong? The guns in pieces now so when i bring it to the store i hope they dont use that as an excuse to void warranty.
and yes i have 30days warranty, i bought the gun 3 days ago. |
|
|
Bookmarks |
|
|