Well L96 lubrication and reassembly

[supermohawk]

I just recently took apart my L96 to do some cleaning and lubing and wanted advice on what brands and types of lubrication to use on different areas.

Also some advice would be helpfull on how to evenly reposition those darned foam rings along the barrel when re-assembling.

[AoiShikaku]

Mad Bull Cylinder Grease works fine for the external cylinder area. Silicon oil the remainder key areas.

the foam o rings around the barrel would stay still by putting a layer or two of duct tape on the barrel to prevent them from moving up and down. Just place them in key areas so they don't slide up when putting your hopup unit and internal barrel through.