m4 ris/ras system

[oldairsofter1962]

hello fellow airsofters!.

im here to ask a question for the future of my ICS m4-20
i will and hope to be adding an RIS/ras on my gun later

but im not soo experience in the knowing of the RIS/RAS stuff .soo il need you guys to help me out with this.

i earlier saw a rail system i thought would be ok. but not sure if id be the right 1 in the sense that im not sure if itl fit and be wrong 1 to buy soo heres the link :





http://www.wgcshop.com/wgc2008/main/...special&rs=RIS and RAS&item=VFC-HGD-URX-03&search_From=category&view=info



i hope u guys can help out thanks alot for reading!

[sammaxwell12]

I am positive only ICS and JBU ris will work on an ICS without mdodification heres a link for a JBU

http://www.airsoftgi.com/product_inf...oducts_id=2486

[overkill1125]

I got aged verified and just waited for the site to update my status.

I just bought the King Arms Colt M4A1 and it comes with the standard M4 handguard. I would like to replace it with a RIS and at the same time be able to put my batteries in it since it is front wired.

Please let me know if it can be done without rewiring the batteries to the stock. Got a link for the RIS that can be used for my KA?

Thanks!

[T9w0rd]

You're probably gonna need a PEQ box for that. Most rails should work with the King Arms, I like Daniel Defense rails, expensive but worth it. If you use NimH batteries you're gonna want to get a PEQ-2, but if you want to use Li-Po's, you can also get a PEQ-15.

[ragnagna]

overkill1125, the KA M4 is mostly TM compatible, so most RIS will fit with your gun. If you don't want to rewire, put your battery in a PEQ battery box or use a lipo battery (it's smaller than NiMh/NiCd batteries)