upgrading G&G CQBR MAX

cdn_ · October 11th, 2010, 20:46

Hey guys and gals, just bought my first AEG and now I am looking at upgrading some internals. I have to open it up anyways to but a smaller, M120 spring in it and was wondering if I should look at new air nozzles, tappit plate, cylinder assembly, and other things. Not sure if they mount to anything but a smaller check book. My question is, for this gun that has great bearings and gears, is there anything else I should consider to upgrade while I have it apart?

Renegade) · October 11th, 2010, 21:18

Less is more... That is all.

Do your spring swap, make sure its shimmed right, decent tapet plate and piston in there for reliability, metal bushings, nozel with oring, and cylinder matches the barrel you have.

scurvythepirate · October 11th, 2010, 21:25

I'd lower it down to a M110 Spring because with a tighbore added (assuming your going to add one) you'll be averagin around 380fps, which is where you want.

Also im not too sure about the internals, whether of not the piston head still sucks, so I'd upgrade that too.

Oh, and get a tightbore.

List:
Spring- http://www.airsoftparts.ca/store2/in...roducts_id=573
Piston Head- http://www.airsoftparts.ca/store2/in...roducts_id=779
Barrel- http://shop.ehobbyasia.com/prometheu...1a1-300mm.html

Darklen · October 11th, 2010, 21:29

It comes with an M100 spring in the box. That should lower the fps to the 350-360 fps range.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 11th, 2010, 20:46	#1
cdn_ Trader rating Join Date: Dec 2008 Location: Niagara Region	upgrading G&G CQBR MAX Hey guys and gals, just bought my first AEG and now I am looking at upgrading some internals. I have to open it up anyways to but a smaller, M120 spring in it and was wondering if I should look at new air nozzles, tappit plate, cylinder assembly, and other things. Not sure if they mount to anything but a smaller check book. My question is, for this gun that has great bearings and gears, is there anything else I should consider to upgrade while I have it apart? __________________ Chris Task Force Delta Canada Redline N7 Milsim M4 FCC Systema PTW TM G17

October 11th, 2010, 21:18	#2
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Less is more... That is all. Do your spring swap, make sure its shimmed right, decent tapet plate and piston in there for reliability, metal bushings, nozel with oring, and cylinder matches the barrel you have. __________________ W1-5 Last edited by Renegade); October 11th, 2010 at 21:27..

October 11th, 2010, 21:25	#3
scurvythepirate Trader rating Join Date: Nov 2007 Location: Kelowna,BC	I'd lower it down to a M110 Spring because with a tighbore added (assuming your going to add one) you'll be averagin around 380fps, which is where you want. Also im not too sure about the internals, whether of not the piston head still sucks, so I'd upgrade that too. Oh, and get a tightbore. List: Spring- http://www.airsoftparts.ca/store2/in...roducts_id=573 Piston Head- http://www.airsoftparts.ca/store2/in...roducts_id=779 Barrel- http://shop.ehobbyasia.com/prometheu...1a1-300mm.html __________________

October 11th, 2010, 21:29	#4
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	It comes with an M100 spring in the box. That should lower the fps to the 350-360 fps range. __________________ *ASC Age Verifier for Red Deer & Area Alberta*

upgrading G&G CQBR MAX

Newbie Tank