|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 1st, 2010, 13:57
|
#1 |
|
KCS with Proud spring&Shooters rocket valve
Has anybody else played with this combo? It's a stock G-26C with a Shooters Design rocket valve and a Proud plug spring. I'm gussing this plug spring is to be used only if you are using a High-flow valve? I used it because of the little extra weight of the rocket valve over the stock one. Or should you use the Shooters rocket vale with the stock plug spring? I have them in two G-26C's with different reults. One chrono's @ 326fps and the other @ 287fps.Any idea's on this would be great,Thanks!
__________________
Death Before Dishonor" Bleeding Black Label" |
|
|
|
July 3rd, 2010, 01:47
|
#2 |
|
|
Well I would have thought someone would have played with this set-up?
__________________
Death Before Dishonor" Bleeding Black Label" |
|
|
|
|
July 8th, 2010, 19:14
|
#3 |
|
I think the best plug spring is stock one in combination with enhanced floating valve. Upgraded plug springs require too much pressure and in my case my AS spring decreased power. In fact my gun did not work proper at all.
|
|
|
|
|
July 8th, 2010, 23:06
|
#4 |
|
|
Thats good to know,from some of the things I'v been seeing out of my set-ups! But I had two different fps with two G-26C's with the same Mag??? I might just put the stock spring back in!
__________________
Death Before Dishonor" Bleeding Black Label" |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
