|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 6th, 2010, 23:12 | #1 |
Is Hop up Feeder a mandatory component?
Are all receivers requires the installation of a hop up feeder? Is it possible that some receivers may not require hop up feeder at all? |
|
May 6th, 2010, 23:19 | #2 |
Can't fix my own guns. Willing to fix yours.
|
all plastic bodies need that
metal bodies need one piece hopups with that part built in |
May 6th, 2010, 23:28 | #3 |
some use a one piece hop up those would not need that piece, some use a 2 piece, which would need that piece depends on brand reciever
|
|
May 6th, 2010, 23:31 | #4 |
* Age Verifier status suspended *
|
Only if you like guns that dont feed. Assuming you have a plastic body.
__________________
Certified Sniper Clinic Instructor and Counter Sniper Sentinel Arms Customs - Specializing In Unique, One of a kind guns |
May 7th, 2010, 00:21 | #5 |
Red Wine & Adderall
|
To reiterate what has been said so far in regards to the image you have linked.
Stock TokyoMarui armalites come with a 2 pieces hopup system. The pic you have link is the lower half of the unit that allows feeding from the magazine into the secondary part of the hopup device. In other AEGS were the receiver is separated by sliding the two portions apart only a single full metal hopup unit is required. That single metal unit is seamless combination of a two piece unit. So to answer your question, yes one is required if the M4 style AEG uses a 2 piece hopup unit
__________________
"Its only a little bit on fire" |
May 7th, 2010, 00:24 | #6 |
No, check out what you have before buying and it doesnt matter
if its a plastic receiver or plastic hop up. Ex. Ics has a plastic hop up for m4 and its one piece. JG m4s with plastic receiver has one piece metal hop up. So check what you have before buying. |
|
|
Bookmarks |
|
|