|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 22nd, 2010, 12:19
|
#1 |
|
Ares Tar 21 M.A.R.S Sight question
Hi all,
So finally replaced my M.A.R.S Sight with a tricon ACOG and installed the shooter top and side rail for my CTAR 21. My next question is, would I be able to mount a say green laser on the side rail of my gun and hold the laser button to turn on that laser? This button was to previously turn on the MARS laser but i figured that it would be an absolute waste.... is there a way to reconfigure the wirings, maybe red and black wires to adapt to my laser system mounted on my side rail? Would appreciate any help / feedback. Thanks |
|
|
|
|
March 22nd, 2010, 13:44
|
#2 | |
|
If your laser has a remote switch, then just plug both wires going to the switch to the stock handguard switch... a switch is a switch...
__________________
Quote:
|
|
|
|
|
|
March 22nd, 2010, 14:14
|
#3 |
 E-01
|
Save your money, most fields don't accept lasers, specially the green ones.
__________________
|
|
|
|
|
March 23rd, 2010, 01:31
|
#4 |
|
haha over here in Hong Kong they do
 So I'm guessing it works!? |
|
|
|
|
|
April 4th, 2010, 16:01
|
#5 |
|
a.k.a. ian209
|
It's really not hard to wire it to work. I have a G&P EOtech 551 with the EOLAD Laser and I wired the laser to the hand guard switch without even soldering. They have the little metal connectors with the screws so you don't even have to solder.
__________________
World record in propane sniffing. Armory -KWA Tavor TAR21 GBBR -TM PX4 w/Detonator Aluminum Slide |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
