G36C or L85 A2?

[heyds]

My first AEG is awhile off yet, but I am debating between these two. I know one is a bit more expensive than the other, but I'm just curious on personal experiances with other people and these guns, or any reccomendations. If someone could give a simple comparison of the two, that would also be fantastic.

Regards,
Heyds

[deep in the bush]

g36 is the easiest AEg i ever had to get into for upgrades. It takes about 10 minutes to swap a spring.

I also have 9 of them.

[heyds]

Wowzers,
What would you recommend, KWA or SRC brand?

[Geoffrey B.]

Probley SRC in my opinion.

[heyds]

Originally Posted by Geoffrey B.

Probley SRC in my opinion.

Yea, I was leaning towards that aswell.

[Shooting Addict]

I prefer the G36 over the L85A2, as for brand I'd take the KWA over SRC.

[heyds]

Originally Posted by Shooting Addict

I prefer the G36 over the L85A2, as for brand I'd take the KWA over SRC.

I'm assuming you've had experience with them both?

[KoolAidMan]

Originally Posted by heyds

I'm assuming you've had experience with them both?

Go buy the l85 Sorry to say but but an l85 take 2 seconds to change the fps and you don't need to swap the spring you dont need to unscrew anything you pull 1 pin
and you don't need tools unless you dismantle the gun awesome gun much better then any g36 IMO

[Shooting Addict]

Originally Posted by heyds

I'm assuming you've had experience with them both?

I don't own them but i've fired them and cracked open the KWA so ya i've used both.

[deep in the bush]

i just don't like working on the trigger of L85. I am looking at total upgrades over time. if you are going to drop over 400 bucks then I look extreemly long term. I had a L85 and loved it but the trigger was a chore compared to the G36. Both are great and it is really what you like.

I have not used a SRC but I have a CA, TM, and KWA G36 all are about the same for repairs and are swapable for parts. Some have better bodies than others thou as far as stability.

I look forward to the L85 I ordered as well.

hope this helps.

I have been using them since they came out. I am still using the orignal I bought so many years ago.

[heyds]

Originally Posted by deep in the bush

i just don't like working on the trigger of L85. I am looking at total upgrades over time. if you are going to drop over 400 bucks then I look extreemly long term. I had a L85 and loved it but the trigger was a chore compared to the G36. Both are great and it is really what you like.

I have not used a SRC but I have a CA, TM, and KWA G36 all are about the same for repairs and are swapable for parts. Some have better bodies than others thou as far as stability.

I look forward to the L85 I ordered as well.

hope this helps.

I have been using them since they came out. I am still using the orignal I bought so many years ago.

What issues do you have with the trigger?

[Shooting Addict]

Originally Posted by heyds

What issues do you have with the trigger?

It's a pain in the ass to work with/on compared to the G36 trigger.

[skalnok]

deep which one would you say has the best body?


also i would agree with him in this and say g36c, ive held and used both and from a non mechanical point of view i preferred the g36's

[deep in the bush]

Trust me on this one. G36 trigger is much easier. I don't wish to write about two pages to explain this.

[deep in the bush]

CA has a great solid body, but any are fine.

Originally Posted by skalnok

deep which one would you say has the best body?


also i would agree with him in this and say g36c, ive held and used both and from a non mechanical point of view i preferred the g36's