Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Stunt Studios M16

:

Newbie Tank

Reply
 
Thread Tools
Old May 13th, 2009, 15:32   #1
CPT Spork
 
Join Date: Mar 2009
Location: Vancouver BC
Stunt Studios M16

So I'm just getting into the sport, didnt; wanna spend big bucks on a gun..yet. after watching countless youtube reviews I settled on the stunt studios M16 with grenade launcher. 1st off this gun is FAR better then my DPMS kitty kat...

the main disapointment is the grenade launcher... 1 cock = 1 BB.... this BB flies out the barrel though a wopping 80FPS.... so watch out when I'm on the field...
not sure if theres any way to remedy this so it fires all the BB. only thing I could think of was to throw a hand full BBs at the enemy. I'm pretty sure that would be more affective then this thing.

as for the gun itself it seems not to bad but I would like to up the FPS slightly. I tried the poor mans chrono and found that 75% of the shots would go through the side of the can. I would like them all to. seems to me that would be a bit closer tot he FPS of the better guns. So what can I do? will a metal gear set froma g&G or something fit in there? or can up the spring rate slightly with the stock plastic gear box?
CPT Spork is offline   Reply With Quote
Old May 13th, 2009, 15:38   #2
MillerBRo
 
Join Date: Mar 2008
ehhh the Stunt Studios stuff is pretty underpowered and over priced... but since you got one the best bet is to look forward to upgrades- specifically a mechbox upgrade, prolly a motor upgrade (and possibly a battery as I suspect the stunt studios guns all use fairly weak batteries since most fire under 200fps). I dont know much about their M16 but I know the AK stunt studios is the same build as their Aftermath Kraken (but with crappier internals) which means almost entirely upgradable- so likely you want a Version 2 mechbox... but I would confirm that with other folks.
MillerBRo is offline   Reply With Quote
Old May 13th, 2009, 16:09   #3
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
Would be cheaper to buy a new, better gun than to upgrade a Stunt Studios gun to bring it to a gameable level.
__________________
Crunchmeister is offline   Reply With Quote
Old May 13th, 2009, 16:15   #4
pusangani
Official ASC "Dumb Ass"
 
pusangani's Avatar
 
Join Date: Jan 2008
Location: Scarbrah, Ontario
Quote:
Originally Posted by Crunchmeister View Post
Would be cheaper to buy a new, better gun than to upgrade a Stunt Studios gun to bring it to a gameable level.
yup, some guns just aren't worth it, omg so elitist
__________________
pusangani is offline   Reply With Quote
Old May 13th, 2009, 16:21   #5
TokyoSeven
Red Wine & Adderall
 
TokyoSeven's Avatar
 
Join Date: Oct 2005
Location: Saskatoon, SK
After considering time and costs, it would be better to almost purchase something entirely brand new that has is further up the airsoft quality ladder. As far as upgrades go gears do not really affect FPS. Different tensions of springs and other items related to the compression part of the mechbox affect FPS. Best of luck with whatever you choose to do.
__________________


"Its only a little bit on fire"
TokyoSeven is offline   Reply With Quote
Old May 13th, 2009, 16:29   #6
CPT Spork
 
Join Date: Mar 2009
Location: Vancouver BC
heres the thing though...
I'm supporting my girl through nursing school, car insurance on 2 cars, rent, hydro, phone bills, cable, internet and food... just started a new job and I'm currently on compo after slipping on oil and spraining my wrist and shoulder...
ontop of my datsun needs a new engine. a 500 doller AEG is out of the question.. trust me I'd love to get one. This gun cost me very little and its what I have so I'll have to make due till things smooth over a bit.
the accuracy is not bad the range is soso, theres gotta be a way to make it alittle bit better. what would a V2 box run me? I'm aware this wont; affect FPS but I'm thinking in terms of adding a better spring won;t my stock gear box die?
CPT Spork is offline   Reply With Quote
Old May 13th, 2009, 16:33   #7
The Saint
 
The Saint's Avatar
 
Join Date: Jan 2005
Location: Quebec
If not $500, how about $350?

Also, if you're that busy and that tight on money, maybe not isn't the best time to get into airsoft. It's better to put it off than waste money on things that just aren't going to cut it while hoping for a miracle.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."
The Saint is offline   Reply With Quote
Old May 13th, 2009, 16:40   #8
TokyoSeven
Red Wine & Adderall
 
TokyoSeven's Avatar
 
Join Date: Oct 2005
Location: Saskatoon, SK
If the gun currently has a plastic gear box, a stronger spring will definately increase the chances of its failure. A brand new version 2 shell can run you anywhere from 30 all the way up to 80ish dollars, and that would only help if all the parts in that plastic mechbox fit correctly into that new shell. Also Im not even certain that the dimensions of the gearbox from the stunt studios m16 are the same as those as a regular v2 mechbox, so there may in fact be some fitment issues.

It seems as if your funds are very tight at the moment, I would put the idea of upgrades or a new airsoft gun on the back burner for a while until things free up a bit. Enjoy what you have now, take good care of it and hopefully it will last until you can afford to purchase something better.
__________________


"Its only a little bit on fire"
TokyoSeven is offline   Reply With Quote
Old May 13th, 2009, 16:41   #9
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
Quote:
Originally Posted by CPT Spork View Post
the accuracy is not bad the range is soso, theres gotta be a way to make it alittle bit better. what would a V2 box run me?
Your opinion will change as soon as you compare it to even a low-end AEG...

For a CHEAP complete mechbox (JG), you're looking at about $100 + shipping. Even then, you'll have to open it and downgrade the spring ($20) because the stock M130 spring is too hot for gaming. It'll be more if you buy a box and build it up with parts, as yours are unuseable. You'll also need at minimum a new hopup rubber, as that one is crap (+$10). And your battery won't last out the summer. You need to add a battery to that setup ($50). And that cheapo wall wart charger will kill that new battery the same way it kills all batteries. So you also need a charger (~ $50 for a cheap one).

So about $230 in upgrades is the BARE MIMINUM you need to get a useable, gamable gun. And that will still leave you with shitty, brittle, sub-par externals that will break at the slightest mishap. Add that to the price you paid for your gun, and all of a sudden it's cost you way more than a brand new CAS G&G gun that will blow it out of the water in any way. New CAS G&G M4 is $308 new.
__________________
Crunchmeister is offline   Reply With Quote
Old May 13th, 2009, 16:50   #10
CPT Spork
 
Join Date: Mar 2009
Location: Vancouver BC
damn...

guess the only thing I have is a Tekin charger for my R/C car... so I'm up on 1 thing heh. Guess I'll wait till I sell off my Volkswagen and get something better. Is there much point in coming out to a game with this gun then?
CPT Spork is offline   Reply With Quote
Old May 13th, 2009, 16:52   #11
viraL
Envies Disaster_Piece's hair
 
viraL's Avatar
 
Join Date: Feb 2009
Location: Burlington, ON
Only if you're there for the sole purpose of testing what a BB feels like and wasting your ammo, because I don't think you'll be able to hit much
viraL is offline   Reply With Quote
Old May 13th, 2009, 16:58   #12
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
Well, you can bring the gun to a game to try it out. Just don't be surprised if it doesn't last the full game. But you may be able to borrow or rent a gun at a game anyway and it'll give you an idea of what better guns are like. Often there are ASC age verifiers at games, so you can take advantage of it to get verified.

At first glance, all airsoft guns may look more or less the same. But you really get what you pay for. There are good starter guns, but expect to pay at least $300 off the hop for that.

And yes, an RC car charger is a good start.
__________________
Crunchmeister is offline   Reply With Quote
Old May 13th, 2009, 17:05   #13
CPT Spork
 
Join Date: Mar 2009
Location: Vancouver BC
cool. guess we'll see what happens then. was planning on going to the next game to be AV anyways.
thanks for the input/info.
CPT Spork is offline   Reply With Quote
Old May 13th, 2009, 19:56   #14
yuhaoyang
asexual lumbricus terrestris
 
yuhaoyang's Avatar
 
Join Date: Jan 2009
Location: Edmonton west
Send a message via MSN to yuhaoyang
DBoys mechbox for ~$50 CDN shipped from ebanned? Although be warned, it doens't come with a proper connector to the battery, you can find a mini t-type male end on ebanned as well, the cylinder head is half plastic, the spring is too strong and too short, +$15 for better spring, cheap plastic bushings, and ect ect.
The JG mechbox+motor from velocityarms for 99.95 or something is a very good deal, just re-shim and add a new spring. It has metal bushings and free shipping as well.
__________________
Quote:
Originally Posted by Deftonius View Post
I'll bet Ronan was the one who sent that email.
Quote:
Originally Posted by Wilson View Post
The chinese steal everything. Haven't seen an original idea come out of that country yet.
yuhaoyang is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 19:42.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.