|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 19th, 2009, 01:59 | #1 |
Vicious MSPaint Wizard
|
Foam for a case
Greets,
I have a nice case I obtained a few years back I want to use for airsoft, but I don't have foam suitable for airsoft in it. There was a thread a while back (ok, a good while back) and I can't find it anymore, so I might as well ask, where can I find suitable foam? IIRC, it's called open celled foam...? I've tried fabric shops and a Home Hardware, no luck. Halp? |
April 19th, 2009, 03:26 | #2 |
Official Crybaby Chairsofter
|
Info on the case.
Pelican sells direct replacement foam for their cases. (You can order that and cut it for your case). If you just want general foam, Home Depot has some. Big fabric/art stores also. |
April 19th, 2009, 04:47 | #3 |
i found that place when i was searching foam for the same thing... http://www.foambymail.com/CharcoalFoam.html might do the job
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
April 19th, 2009, 05:06 | #4 |
* AV revoked *
|
Any chance that they have a store in Montreal ? I want to bring my gun case to cut the foam to fill as well.
Cheers ! KND
__________________
|
April 20th, 2009, 17:32 | #5 |
Walmart sells egg crate foam in there material section or bedding..10 bucks gets you 3' X 5' roll of it
|
|
April 20th, 2009, 20:14 | #6 |
April 20th, 2009, 21:11 | #7 |
Red Wine & Adderall
|
Check out your local textile shops, I managed to find foam to do cut outs for my case for under $10.00.
Most textile stores carry all sorts of foam, that vary in density and color.
__________________
"Its only a little bit on fire" |
April 21st, 2009, 23:10 | #8 |
aka coachster
|
upholstery shops will have it. most hardware shops should have it. even arts and crafts stores.
|
|
Bookmarks |
|
|