Adjusting hop-up on an AEG

[SultanOfShwing]

I've got a TM SR-16 and I was wondering how I adjust the hop-up? It's probably not necessary but I just want to see the effect of adjusting the hop-up.

[Defcon_Carl]

m4 variants are all the same, moving the leaver towards the barrel(clockwise) will give it more hop and moving it towards the stock(counter-clockwise) will give it less hop.

[kalnaren]

Originally Posted by SultanOfShwing

I've got a TM SR-16 and I was wondering how I adjust the hop-up? It's probably not necessary but I just want to see the effect of adjusting the hop-up.

Hop-up is necessary. If you don't use it you'll never achieve the full effectiveness of your gun.

[SultanOfShwing]

Originally Posted by kalnaren

Hop-up is necessary. If you don't use it you'll never achieve the full effectiveness of your gun.

By not necessary, I meant that I probably won't need to change anything because it should already be optimized because it is a used gun.

By the way what does the lever looks like? I opened up the panel where the hop-up is and I see two gears. One large and obvious and one small one. I'm guessing I adjust the bigger one but it is pretty stiff and I don't want to break anything.

[Darklen]

There is no lever on armalite type guns, it's a wheel. Pull back the charging handle and the dust cover will open on the right side of the gun as well as the fake bolt will open. The hopup wheel is inside the fake bolt. It's the large wheel of the three you want to adjust. Clockwise for more hopup, counterclockwise for less. Adjust until your bb's go as flat and as far as possible. Depending on the gun, it should be around 100'-150'. Be sure to make the adjustments when you can safely and legally discharge your gun and where you have enough space to make it effective, as in not indoors (unless you have access to an aircraft hangar.)


Gun removed for clarity.

And BTW, all armalite type hopups go out of whack and need to be readjusted. How often depends on a lot, but when you see your bb's not ranging the way they should, make an adjustment. You'd probably even have to adjust it if you change brands and weights of bb's.

[Omemee1]

Originally Posted by SultanOfShwing

By not necessary, I meant that I probably won't need to change anything because it should already be optimized because it is a used gun.

By the way what does the lever looks like? I opened up the panel where the hop-up is and I see two gears. One large and obvious and one small one. I'm guessing I adjust the bigger one but it is pretty stiff and I don't want to break anything.

if you can't turn it one way its proly because its on full hopup or the other way around, no hop, you shouldn't have to force it, try turning it the opposite way it won't turn..

[kalnaren]

Originally Posted by SultanOfShwing

By not necessary, I meant that I probably won't need to change anything because it should already be optimized because it is a used gun.

Hop-up changes. You will probably need to do minor adjustments depending on atmospheric conditions, and when one cleans the barrel it's usually a really good idea to dial it off. M16-style hop-ups are also known to not hold their position.

Hop-up isn't static. Get used to playing with it.

[CDN_Stalker]

Originally Posted by kalnaren

Hop-up changes. You will probably need to do minor adjustments depending on atmospheric conditions, and when one cleans the barrel it's usually a really good idea to dial it off. M16-style hop-ups are also known to not hold their position.

Hop-up isn't static. Get used to playing with it.

Mostly due to inner barrel wobble, and having no solid connections in it's design.

There is a reason any MP5 will outshoot any Armalite for accuracy, MP5 hop up unit and inner barrel is held solid in three places............. all Armalites are held in place by a loose tongue and groove joint between the hop up unit and the breech of the outer barrel, and a small spring. I've never seen one shoot less than 2inches at 30ft distance, so don't get your hopes up about it being a tack driver.

[SultanOfShwing]

All right. Thanks for the help guys.