Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Gear Grease

:

Upgrades & Modifications

Reply
 
Thread Tools
Old December 28th, 2008, 15:17   #1
[]D[][]\/[][]D
 
[]D[][]\/[][]D's Avatar
 
Join Date: Dec 2005
Location: Scarborough, ON
Gear Grease

I know that you can use White Lithium grease for gears, but the only white lithium grease I can find at either Canadian Tire or Home Depot is the type that's in a aerosol can. Can I use that for my gears?
[]D[][]\/[][]D is offline   Reply With Quote
Old December 28th, 2008, 15:21   #2
Conscript
AKaholic
 
Conscript's Avatar
 
Join Date: Jan 2005
Location: GTA
Quote:
Originally Posted by []D[][]\/[][]D View Post
I know that you can use White Lithium grease for gears, but the only white lithium grease I can find at either Canadian Tire or Home Depot is the type that's in a aerosol can. Can I use that for my gears?
It's actual grease and it's in a tube, it's called Lith-ease, it should be in the automotive section of Canadian Tire.
Conscript is offline   Reply With Quote
Old December 28th, 2008, 15:26   #3
[]D[][]\/[][]D
 
[]D[][]\/[][]D's Avatar
 
Join Date: Dec 2005
Location: Scarborough, ON
Quote:
Originally Posted by Conscript View Post
It's actual grease and it's in a tube, it's called Lith-ease, it should be in the automotive section of Canadian Tire.
I can't seem to find it on their website. But I'll head over there and see for myself. Thanks!
[]D[][]\/[][]D is offline   Reply With Quote
Old December 28th, 2008, 15:28   #4
Darklen
Administrator
 
Join Date: Jan 2004
Location: Red Deer, AB
Lith-Ease is in a red and white tube. It should be in with the other greases & WD40.
__________________
ASC Age Verifier for Red Deer & Area Alberta
Darklen is offline   Reply With Quote
Old December 28th, 2008, 15:34   #5
F34N0R
 
F34N0R's Avatar
 
Join Date: Jun 2003
Location: Saint-Georges, QC
Send a message via MSN to F34N0R
Lith-ease is good

If you want spray i recommand fluid film (canadian tire), i've lubed many mechbox with it. No petroleum distillat, sticks, clean & protect plastic and metal. Never had any short or long term issue.

I tried Medical approved grease (used in cordless drill), but havent had great success.

Otherwise you can buy Systema gear grease at 15$
__________________
WAR-THUG CORP.
F34N0R is offline   Reply With Quote
Old December 28th, 2008, 15:51   #6
[]D[][]\/[][]D
 
[]D[][]\/[][]D's Avatar
 
Join Date: Dec 2005
Location: Scarborough, ON
I need it right now, so ordering Systema Gear Grease is out of the question. Thanks for the suggestion though.
[]D[][]\/[][]D is offline   Reply With Quote
Old December 28th, 2008, 16:12   #7
ArcticFox1984
 
ArcticFox1984's Avatar
 
Join Date: Feb 2007
Location: Toronto, Ontario
Best stuff I've used so far is Superlube, in everyway comparable or superior to Systema gear grease with teflon, and guarder teflon gear grease.

I'de avoid white lithium as over time it tends to seperate into a very thin clear liquid and white paste with the consistancy of soap scum.

Superlube is about $14.00 a tube, contains PTFE ( Teflon ) protects plastic and metal and keeps its consistancy in both very hot and very cold conditions.

As mentioned in another thread on ASC:

It can be found at your local GMC Dealership

Parts# 10953437

Last edited by ArcticFox1984; December 28th, 2008 at 16:16..
ArcticFox1984 is offline   Reply With Quote
Old December 28th, 2008, 16:58   #8
[]D[][]\/[][]D
 
[]D[][]\/[][]D's Avatar
 
Join Date: Dec 2005
Location: Scarborough, ON
Well I just got back from Canadian Tire and I purchased an 8 oz. tube of Lith-Ease White Lithium Grease. I'm not to worried about it because I'm just using it in a spare gearbox with spare parts that I have laying around. But I'll make note of the Superlube for next time, thanks.
[]D[][]\/[][]D is offline   Reply With Quote
Old December 29th, 2008, 23:01   #9
[]D[][]\/[][]D
 
[]D[][]\/[][]D's Avatar
 
Join Date: Dec 2005
Location: Scarborough, ON
Should I put grease in between the teeth of the gears as well?
[]D[][]\/[][]D is offline   Reply With Quote
Old December 29th, 2008, 23:23   #10
Darklen
Administrator
 
Join Date: Jan 2004
Location: Red Deer, AB
Yes. A light lubing inbetween the gear teeth as well as the axle shafts where they go into the bushings.
__________________
ASC Age Verifier for Red Deer & Area Alberta
Darklen is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 22:19.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.